JVC RX-D402B, RX-D401S manual For Canada/pour le Canada, For U.S.A, Jvc

Page 2

Warnings, Cautions, and Others

Mises en garde, précautions et indications diverses

 

 

CAUTION

 

 

 

RISK OF ELECTRIC SHOCK

 

 

 

DO NOT OPEN

 

 

 

 

 

 

 

 

 

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK,

 

DO NOT REMOVE COVER (OR BACK).

 

NO USER SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

For Canada/pour le Canada

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT ATTENTION: POUR EVITER LES CHOCS ELECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQUAU FOND

The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

For U.S.A

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.

CAUTION

To reduce the risk of electrical shocks, fire, etc.:

1.Do not remove screws, covers or cabinet.

2.Do not expose this appliance to rain or moisture.

ATTENTION

Afin d’éviter tout risque d’électrocution, d’incendie, etc.:

1.Ne pas enlever les vis ni les panneaux et ne pas ouvrir le coffret de l’appareil.

2.Ne pas exposer l’appareil à la pluie ni à l’humidité.

Caution–– STANDBY/ON button!

Disconnect the mains plug to shut the power off completely. The STANDBY/ON button in any position does not disconnect the mains line. The power can be remote controlled.

Attention—Touche STANDBY/ON!

Déconnectez la fiche d’alimentation secteur pour couper

l’alimentation complètement. La touche STANDBY/ON, dans n’importe quelle position, ne déconnecte pas le système du secteur. L’alimentation ne peut pas être télécommandé.

Note to CATV system installer:

This reminder is provided to call the CATV system installer’s attention to Section 820-40 of the NEC which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

For U.S.A

Declaration of Conformity:

Trade Name:

JVC

Model Number:

RX-D401S/RX-D402B

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1)This device may not cause harmful interference.

(2)This device must accept any interference received,

including interference that may cause undesired operation. Responsible Party: JVC Americas Corp.

Address:1700 Valley Road, Wayne New Jersey 07470

Telephone Number: 973-317-5000

For Canada/pour le Canada

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

Image 2
Contents RX-D401S / RX-D402B For Customer UseFor U.S.A For Canada/pour le CanadaFor U.S.A JVCFeatures Table of Contents Parts identification Remote controlWhen operating a DVD player, set the mode selector o to DVD AUDIO, TV , DBS/CATV , VCR , DVR/DVDDisplay window Front panelCENTER, SUBWOOFER, Surr L, Surr R Rear panelVCR DBS IN, DVR/DVD IN, Monitor OUT Surround Back SPEAKERS, Surround SpeakersChecking the supplied accessories Before InstallationPutting batteries in the remote control Getting startedFM antenna supplied Connecting the FM and AM antennasFM antenna connection AntennaConnecting the speakers Connecting the speakersSpeaker Layout Diagram Connecting the powered subwooferHdmi connection Connecting video componentsConverting video signals into Hdmi signals Turn off all components before making connectionsAudio/video connection Only for DVD recorder To left/right audio channel inputWhite DVD recorder orMonaural audio cable Not supplied Only for DVD recorder To S-video inputRed Stereo audio cable Not supplied Connecting a DBS tuner Connecting a TVDigital input terminals Connecting the power cordDigital audio connection Digital output terminalUSB connection Selecting the video input setting Turn on the powerTo turn off the power into standby Basic operationsListening with headphones Adjust the volumeSelecting the audio input setting Hdmi for DVR/DVD, VCR and DBSTurning off the sounds temporarily Selecting the digital decode modeTo restore the sound, press Muting again Changing the display brightnessSignal and speaker indicators on the display Turning off the power with the Sleep TimerBasic adjustment of auto memory From the remote control only Press Sleep repeatedlyMenu operation buttons Basic settingsOn the front panel From the remote control Press SETRoom size and the speaker distance/output level Basic setting itemsSpeakers channels number and the size Ex. When setting Digital in 1 terminal Operating procedurePress Setting ButtonInitial setting Unit meter Speaker distance Setting the speaker distanceInitial setting SB OUT 2SPK OUTSetting subwoofer output-SUBWOOFER OUT Activating the EX/ES/PLIIx setting- EX/ES/PLIIxSetting bass sound Selecting the main or sub channelUsing the Midnight mode Setting the low frequency effect attenuator-LFESelecting the output video signals Setting the Audio delay levelMemorizing the volume level for each source-ONE Touch OP Press Adjust Sound adjustmentsBasic adjustment items ∞ button SET button 4 2 / 3 buttonSBR SBL Press Test to check the speakers’ output balanceAttenuating the input signal-INPUT ATT Adjusting the bass soundsAdjusting the virtual room size for DSP modes Adjusting the liveness effect for DSP modesAdjusting the center tone-CENTER Tone To store the preset stations Tuning in to stations manuallyUsing preset tuning Tuner operationsSelecting the FM reception mode To tune in a preset stationIntroducing the Surround modes Creating realistic sound fieldsReproducing theater ambience Dolby DigitalAbout other digital signals DTSIntroducing the DSP modes All Channel Stereo mode ALL CH Stereo3D Headphone mode Digital Acoustic Processor DAP modesAbout the DSP modes Using the Surround/DSP modesDTSDolby Digital Incoming Signal Type Virtual Surround BackWhen you select Auto Surround Selecting the Surround/DSP modesConnections 2 Video cable connection AV Compu Link remote control systemConnections 1 AV Compu Link connection Monaural mini-plugs not suppliedAutomatic power on/off Connecting procedureAutomatic selection of TV’s input mode One-touch DVD playChannel + Operating other JVC productsVCR REWRelease DVR/DVD Changing the remote control code for DVD recorderDVD recorder or DVD player DVD MenuRelease TV Changing the transmittable signals for operating a TVOperating other manufacturers’ products Try to operate your TV by pressing TVTry to operate your VCR by pressing VCR Changing the transmittable signals for operating a VCRRelease VCR Manufacturers’ codes for VCRManufacturers’ codes for DBS tuner Release DBS/CATVManufacturers’ codes for Catv converter Try to operate your DVD player by pressing DVR/DVDProblem Possible Cause Solution TroubleshootingPower Sound and pictureRemote control Tuner FM tuner IHF SpecificationsAmplifier AM tunerPage Page 0705RYMMDWJEIN

RX-D401S, RX-D402B specifications

The JVC RX-D402B and RX-D401S are two impressive models from JVC's lineup of AV receivers, designed to elevate the audio-visual experience for home theater enthusiasts. Both units incorporate cutting-edge technologies and features aimed at delivering superior sound quality and versatility.

The RX-D402B is a robust receiver that emphasizes high-definition audio performance. It supports various audio formats, including Dolby TrueHD and DTS-HD Master Audio, ensuring an immersive surround sound experience. One of its standout features is its 4K video processing capability, allowing users to connect their latest high-resolution devices seamlessly. With multiple HDMI inputs, it can accommodate various sources, from gaming consoles to streaming devices.

Similarly, the RX-D401S provides a compelling feature set designed for audiophiles. This model supports a wide array of streaming services, making it easy to access music libraries and online content. Bluetooth connectivity is another significant advantage, allowing users to stream audio directly from smartphones and tablets without hassle. An integrated digital tuner and built-in Wi-Fi make this receiver a versatile option for entertainment.

Both models employ JVC's proprietary audio technology, designed to enhance sound clarity and fidelity. Equipped with high-quality DACs (Digital-to-Analog Converters), they ensure that audio playback remains crisp and dynamic, regardless of the source. Users can also take advantage of the advanced equalization settings, enabling them to tailor the sound profile to their liking.

Another notable aspect of these receivers is their user-friendly interface. The on-screen display simplifies navigation through various settings and options. Additionally, these models come with comprehensive remote controls that allow users to manage their entire audio-visual systems effortlessly.

In terms of build quality, both the RX-D402B and RX-D401S feature durable construction and a sleek design, making them appealing additions to any home theater setup. They are also equipped with multiple outputs, including subwoofer outputs, ensuring compatibility with a range of speaker configurations.

With support for high-definition audio formats, seamless streaming options, and robust performance features, the JVC RX-D402B and RX-D401S are excellent choices for those looking to enhance their home entertainment experience. Whether enjoying a movie night, gaming session, or listening to music, these receivers offer a high-quality audio experience that meets the demands of modern consumers.