JVC RX-D402B Basic settings, Menu operation buttons, On the front panel From the remote control

Page 22

Basic settings

To obtain the best possible sound effect from Surround/DSP modes (see pages 33 to 37), you need to set up the speaker and subwoofer information after all the connections are completed. From pages 20 to 26, how to set speakers and other basic items of the receiver are explained.

Setting the speaker information easily—Quick Speaker Setup

Quick Speaker Setup helps you to easily and quickly register the speaker size, speaker distance, and output level of each speaker according to your listening room to create the best possible surround effect.

•You can also register each speaker’s information manually. For details, see pages 22, 23, and 28.

Menu operation buttons

On the front panel:

 

1,7

2,4,6

1,3,5

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

From the remote control:

1

1 (5 / ∞ button)

2,4,6 (SET button)

 

3,5 (2 / 3 button)

 

7

Before you start, remember...

There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

In this section, the operation of the remote control is used for explaining.

1Press SETTING and press 5 / ∞ button repeatedly until “QUICK SPK SET” appears on the display.

• On the front panel, press SETTING and turn MULTI JOG.

ANALOG

LR

S.WFR

2Press SET.

ANALOG

LR

S.WFR

3Press 2 / 3 button repeatedly to select an appropriate number of the connected speakers (speaker channel number).

As you press 2 / 3 button, the speaker channel number changes as follows.

•On the front panel, turn MULTI JOG.

•For the details of speaker channel number, see “ Speakers (channels) number and the size” on page 21.

ANALOG

LR

S.WFR

2.0ch 2.1ch 3.0ch 3.1ch

4.0ch 4.1ch 5.0ch 5.1ch

6.0ch 6.1ch 7.0ch* 7.1ch

(Back to the beginning)

* “7.0ch” is the initial setting.

4Press SET.

ANALOG

LR

S.WFR

5Press 2 / 3 button repeatedly to select an appropriate room size to match to your listening room.

As you press 2 / 3 button, the room size changes as follows:

•On the front panel, turn MULTI JOG.

•To select your appropriate room size, see “Room size and the speaker distance/output level” on page 21.

ANALOG

LR

S.WFR

S ML*(Back to the beginning)

* “L” is the initial setting.

6Press SET.

QUICK SPEAKER SETUP is now completed, then the display goes back to the previous setting item.

7Press EXIT.

• On the front panel, press SETTING.

NOTES

•This procedure will not be completed if you stop in the middle of the setting process.

•Once Quick Speaker Setup is performed, the speaker output levels are also set to appropriate values automatically (common to all sources). If you want to set the speaker output levels separately for each source, see “Adjusting the speaker output levels” on page 28.

20

Page 21 Page 23
Image 22
Page 21 Page 23
Contents RX-D401S / RX-D402B For Customer UseFor U.S.A For Canada/pour le CanadaFor U.S.A JVCFeatures Table of Contents Parts identification Remote controlWhen operating a DVD player, set the mode selector o to DVD AUDIO, TV , DBS/CATV , VCR , DVR/DVDDisplay window Front panelCENTER, SUBWOOFER, Surr L, Surr R Rear panelVCR DBS IN, DVR/DVD IN, Monitor OUT Surround Back SPEAKERS, Surround SpeakersChecking the supplied accessories Before InstallationPutting batteries in the remote control Getting startedFM antenna supplied Connecting the FM and AM antennasFM antenna connection AntennaConnecting the speakers Connecting the speakersSpeaker Layout Diagram Connecting the powered subwooferHdmi connection Connecting video componentsConverting video signals into Hdmi signals Turn off all components before making connectionsAudio/video connection Only for DVD recorder To left/right audio channel inputWhite DVD recorder orMonaural audio cable Not supplied Only for DVD recorder To S-video inputRed Stereo audio cable Not supplied Connecting a DBS tuner Connecting a TVDigital input terminals Connecting the power cordDigital audio connection Digital output terminalUSB connection Selecting the video input setting Turn on the powerTo turn off the power into standby Basic operationsListening with headphones Adjust the volumeSelecting the audio input setting Hdmi for DVR/DVD, VCR and DBSTurning off the sounds temporarily Selecting the digital decode modeTo restore the sound, press Muting again Changing the display brightnessSignal and speaker indicators on the display Turning off the power with the Sleep TimerBasic adjustment of auto memory From the remote control only Press Sleep repeatedlyMenu operation buttons Basic settingsOn the front panel From the remote control Press SETSpeakers channels number and the size Basic setting itemsRoom size and the speaker distance/output level Ex. When setting Digital in 1 terminal Operating procedurePress Setting ButtonInitial setting Unit meter Speaker distance Setting the speaker distanceInitial setting SB OUT 2SPK OUTSetting subwoofer output-SUBWOOFER OUT Activating the EX/ES/PLIIx setting- EX/ES/PLIIxSetting bass sound Selecting the main or sub channelUsing the Midnight mode Setting the low frequency effect attenuator-LFEMemorizing the volume level for each source-ONE Touch OP Setting the Audio delay levelSelecting the output video signals Press Adjust Sound adjustmentsBasic adjustment items ∞ button SET button 4 2 / 3 buttonSBR SBL Press Test to check the speakers’ output balanceAttenuating the input signal-INPUT ATT Adjusting the bass soundsAdjusting the virtual room size for DSP modes Adjusting the liveness effect for DSP modesAdjusting the center tone-CENTER Tone To store the preset stations Tuning in to stations manuallyUsing preset tuning Tuner operationsSelecting the FM reception mode To tune in a preset stationIntroducing the Surround modes Creating realistic sound fieldsReproducing theater ambience Dolby DigitalAbout other digital signals DTSIntroducing the DSP modes All Channel Stereo mode ALL CH Stereo3D Headphone mode Digital Acoustic Processor DAP modesAbout the DSP modes Using the Surround/DSP modesDTSDolby Digital Incoming Signal Type Virtual Surround BackWhen you select Auto Surround Selecting the Surround/DSP modesConnections 2 Video cable connection AV Compu Link remote control systemConnections 1 AV Compu Link connection Monaural mini-plugs not suppliedAutomatic power on/off Connecting procedureAutomatic selection of TV’s input mode One-touch DVD playChannel + Operating other JVC productsVCR REWRelease DVR/DVD Changing the remote control code for DVD recorderDVD recorder or DVD player DVD MenuRelease TV Changing the transmittable signals for operating a TVOperating other manufacturers’ products Try to operate your TV by pressing TVTry to operate your VCR by pressing VCR Changing the transmittable signals for operating a VCRRelease VCR Manufacturers’ codes for VCRManufacturers’ codes for DBS tuner Release DBS/CATVManufacturers’ codes for Catv converter Try to operate your DVD player by pressing DVR/DVDProblem Possible Cause Solution TroubleshootingPower Sound and pictureRemote control Tuner FM tuner IHF SpecificationsAmplifier AM tunerPage Page 0705RYMMDWJEIN

RX-D401S, RX-D402B specifications

The JVC RX-D402B and RX-D401S are two impressive models from JVC's lineup of AV receivers, designed to elevate the audio-visual experience for home theater enthusiasts. Both units incorporate cutting-edge technologies and features aimed at delivering superior sound quality and versatility.

The RX-D402B is a robust receiver that emphasizes high-definition audio performance. It supports various audio formats, including Dolby TrueHD and DTS-HD Master Audio, ensuring an immersive surround sound experience. One of its standout features is its 4K video processing capability, allowing users to connect their latest high-resolution devices seamlessly. With multiple HDMI inputs, it can accommodate various sources, from gaming consoles to streaming devices.

Similarly, the RX-D401S provides a compelling feature set designed for audiophiles. This model supports a wide array of streaming services, making it easy to access music libraries and online content. Bluetooth connectivity is another significant advantage, allowing users to stream audio directly from smartphones and tablets without hassle. An integrated digital tuner and built-in Wi-Fi make this receiver a versatile option for entertainment.

Both models employ JVC's proprietary audio technology, designed to enhance sound clarity and fidelity. Equipped with high-quality DACs (Digital-to-Analog Converters), they ensure that audio playback remains crisp and dynamic, regardless of the source. Users can also take advantage of the advanced equalization settings, enabling them to tailor the sound profile to their liking.

Another notable aspect of these receivers is their user-friendly interface. The on-screen display simplifies navigation through various settings and options. Additionally, these models come with comprehensive remote controls that allow users to manage their entire audio-visual systems effortlessly.

In terms of build quality, both the RX-D402B and RX-D401S feature durable construction and a sleek design, making them appealing additions to any home theater setup. They are also equipped with multiple outputs, including subwoofer outputs, ensuring compatibility with a range of speaker configurations.

With support for high-definition audio formats, seamless streaming options, and robust performance features, the JVC RX-D402B and RX-D401S are excellent choices for those looking to enhance their home entertainment experience. Whether enjoying a movie night, gaming session, or listening to music, these receivers offer a high-quality audio experience that meets the demands of modern consumers.
Top Page Image Contents