JVC RX-D401S, RX-D402B manual Setting the speaker distance, Initial setting SB OUT 2SPK, Out

Page 25

Setting the surround back speaker(s)—S BACK OUT

Register the number of the surround back speaker(s).

SB OUT <1SPK> Select when you use 1 surround back speaker.

SB OUT <2SPK> Select when you use 2 surround back speakers.

Initial setting: SB OUT <2SPK>

NOTES

• If you have selected “SML (small)” for the front speaker size,

you cannot select “LRG (large)” for other speakers.

• When “SUBWOOFER” is set to “SUBWFR <NO>,” the front

speaker size is fixed to “LRG” (and you cannot select “SML”).

• When “SURROUND SPK” is set to “SML (small),” you cannot

select “LRG (large)” for the surround back speaker.

• When “SURROUND SPK” is set to “NO,” the surround back

speaker is fixed to “NO.”

• When “S BACK SPK” is set to “NO,” you cannot select “S BACK

C

FL

SL

SBL

FR

3.3 m

(11 ft)

3.0 m

(10 ft)

2.7 m

(9 ft)

2.4m (8 ft)

2.1m (7 ft)

SR

SBR

OUT.”

• When “S BACK OUT” is set to “SB OUT <1SPK>,” connect the

surround back speaker to the left surround back speaker

terminal (see page 8). No sound comes from the surround back

speaker if you connect it to the right surround back speaker

terminal.

Setting the speaker distance

The distance from your listening point to the speakers is one of the important elements to obtain the best possible sound effect from the Surround/DSP modes.

By referring to the speaker distance, the receiver automatically sets the delay time of the sound through each speaker so that sounds through all the speakers can reach you at the same time.

7Measuring unit—DIST UNIT

Select which measuring unit you use.

UNIT <meter> Select to set the distance in meters. UNIT <feet> Select to set the distance in feet.

Initial setting: UNIT <meter>

7Speaker distance—

FRONT L DIST (for the left front speaker), FRONT R DIST (for the right front speaker), CENTER DIST (for the center speaker), SURR L DIST (for the left surround speaker), SURR R DIST (for the right surround speaker),

S BACK L DIST (for the left surround back speaker), S BACK R DIST (for the right surround back speaker)

Adjustable range: 0.3 m to 9.0 m in 0.3 m intervals (1 ft to 30 ft in 1 ft intervals)

Initial setting: 3.0 m (10 ft) for all speakers

In this case, set the distance as follows:

Left front speaker (FL):

“FRONT L <3.0m> (10ft)”

Right front speaker (FR):

“FRONT R <3.0m> (10ft)”

Center speaker (C):

“CENTER <3.0m> (10ft)”

Left surround speaker (SL):

“SURR L <2.7m> (9ft)”

Right surround speaker (SR):

“SURR R <2.7m> (9ft)”

Left surround back speaker (SBL) :

“S BACK L <2.4m> (8ft)”

Right surround back speaker (SBR) : “S BACK R <2.4m> (8ft)”

NOTES

•You cannot set the speaker distance for the speakers you have set to “NO.”

•If you have selected “SB OUT <1SPK>” for “S BACK OUT” (see the left column), “S BACK DIST” appears instead of “S BACK L DIST” and “S BACK R DIST.”

23

Page 24 Page 26
Image 25
Page 24 Page 26
Contents For Customer Use RX-D401S / RX-D402BFor U.S.A For Canada/pour le CanadaFor U.S.A JVCFeatures Table of Contents When operating a DVD player, set the mode selector o to DVD Remote controlParts identification AUDIO, TV , DBS/CATV , VCR , DVR/DVDFront panel Display windowVCR DBS IN, DVR/DVD IN, Monitor OUT Rear panelCENTER, SUBWOOFER, Surr L, Surr R Surround Back SPEAKERS, Surround SpeakersPutting batteries in the remote control Before InstallationChecking the supplied accessories Getting startedFM antenna connection Connecting the FM and AM antennasFM antenna supplied AntennaSpeaker Layout Diagram Connecting the speakersConnecting the speakers Connecting the powered subwooferConverting video signals into Hdmi signals Connecting video componentsHdmi connection Turn off all components before making connectionsOnly for DVD recorder To left/right audio channel input Audio/video connectionMonaural audio cable Not supplied DVD recorder orWhite Only for DVD recorder To S-video inputRed Stereo audio cable Not supplied Connecting a TV Connecting a DBS tunerDigital audio connection Connecting the power cordDigital input terminals Digital output terminalUSB connection To turn off the power into standby Turn on the powerSelecting the video input setting Basic operationsSelecting the audio input setting Adjust the volumeListening with headphones Hdmi for DVR/DVD, VCR and DBSTo restore the sound, press Muting again Selecting the digital decode modeTurning off the sounds temporarily Changing the display brightnessBasic adjustment of auto memory Turning off the power with the Sleep TimerSignal and speaker indicators on the display From the remote control only Press Sleep repeatedlyOn the front panel From the remote control Basic settingsMenu operation buttons Press SETSpeakers channels number and the size Basic setting itemsRoom size and the speaker distance/output level Press Setting Operating procedureEx. When setting Digital in 1 terminal ButtonInitial setting SB OUT 2SPK Setting the speaker distanceInitial setting Unit meter Speaker distance OUTSetting bass sound Activating the EX/ES/PLIIx setting- EX/ES/PLIIxSetting subwoofer output-SUBWOOFER OUT Selecting the main or sub channelSetting the low frequency effect attenuator-LFE Using the Midnight modeMemorizing the volume level for each source-ONE Touch OP Setting the Audio delay levelSelecting the output video signals Basic adjustment items Sound adjustmentsPress Adjust ∞ button SET button 4 2 / 3 buttonPress Test to check the speakers’ output balance SBR SBLAdjusting the virtual room size for DSP modes Adjusting the bass soundsAttenuating the input signal-INPUT ATT Adjusting the liveness effect for DSP modesAdjusting the center tone-CENTER Tone Using preset tuning Tuning in to stations manuallyTo store the preset stations Tuner operationsTo tune in a preset station Selecting the FM reception modeReproducing theater ambience Creating realistic sound fieldsIntroducing the Surround modes Dolby DigitalDTS About other digital signals3D Headphone mode All Channel Stereo mode ALL CH StereoIntroducing the DSP modes Digital Acoustic Processor DAP modesDTSDolby Digital Incoming Signal Type Using the Surround/DSP modesAbout the DSP modes Virtual Surround BackSelecting the Surround/DSP modes When you select Auto SurroundConnections 1 AV Compu Link connection AV Compu Link remote control systemConnections 2 Video cable connection Monaural mini-plugs not suppliedAutomatic selection of TV’s input mode Connecting procedureAutomatic power on/off One-touch DVD playVCR Operating other JVC productsChannel + REWDVD recorder or DVD player Changing the remote control code for DVD recorderRelease DVR/DVD DVD MenuOperating other manufacturers’ products Changing the transmittable signals for operating a TVRelease TV Try to operate your TV by pressing TVRelease VCR Changing the transmittable signals for operating a VCRTry to operate your VCR by pressing VCR Manufacturers’ codes for VCRManufacturers’ codes for Catv converter Release DBS/CATVManufacturers’ codes for DBS tuner Try to operate your DVD player by pressing DVR/DVDPower TroubleshootingProblem Possible Cause Solution Sound and pictureRemote control Tuner Amplifier SpecificationsFM tuner IHF AM tunerPage Page 0705RYMMDWJEIN

RX-D401S, RX-D402B specifications

The JVC RX-D402B and RX-D401S are two impressive models from JVC's lineup of AV receivers, designed to elevate the audio-visual experience for home theater enthusiasts. Both units incorporate cutting-edge technologies and features aimed at delivering superior sound quality and versatility.

The RX-D402B is a robust receiver that emphasizes high-definition audio performance. It supports various audio formats, including Dolby TrueHD and DTS-HD Master Audio, ensuring an immersive surround sound experience. One of its standout features is its 4K video processing capability, allowing users to connect their latest high-resolution devices seamlessly. With multiple HDMI inputs, it can accommodate various sources, from gaming consoles to streaming devices.

Similarly, the RX-D401S provides a compelling feature set designed for audiophiles. This model supports a wide array of streaming services, making it easy to access music libraries and online content. Bluetooth connectivity is another significant advantage, allowing users to stream audio directly from smartphones and tablets without hassle. An integrated digital tuner and built-in Wi-Fi make this receiver a versatile option for entertainment.

Both models employ JVC's proprietary audio technology, designed to enhance sound clarity and fidelity. Equipped with high-quality DACs (Digital-to-Analog Converters), they ensure that audio playback remains crisp and dynamic, regardless of the source. Users can also take advantage of the advanced equalization settings, enabling them to tailor the sound profile to their liking.

Another notable aspect of these receivers is their user-friendly interface. The on-screen display simplifies navigation through various settings and options. Additionally, these models come with comprehensive remote controls that allow users to manage their entire audio-visual systems effortlessly.

In terms of build quality, both the RX-D402B and RX-D401S feature durable construction and a sleek design, making them appealing additions to any home theater setup. They are also equipped with multiple outputs, including subwoofer outputs, ensuring compatibility with a range of speaker configurations.

With support for high-definition audio formats, seamless streaming options, and robust performance features, the JVC RX-D402B and RX-D401S are excellent choices for those looking to enhance their home entertainment experience. Whether enjoying a movie night, gaming session, or listening to music, these receivers offer a high-quality audio experience that meets the demands of modern consumers.
Top Page Image Contents