JVC RX-D401S, RX-D402B manual Selecting the Surround/DSP modes, When you select Auto Surround

Page 39

Activating the Surround/DSP modes

Available Surround/DSP modes vary depending on the speaker settings and the incoming signals. For details, see page 36.

Activating one of the Surround/DSP modes automatically recalls the memorized settings and adjustments.

•To adjust the speaker output level, see page 28.

•When activating one of the Surround/DSP modes, you can adjust CENTER TONE (see page 30).

•When activating one of the Surround/DSP modes (except PLIIx MUSIC, PLII MUSIC, NEO:6 MUSIC, and ALL CH STEREO), you can adjust CENTER ALIGN (see page 30).

•When activating “NEO:6 MUSIC”, you can adjust CENTER GAIN (see page 30).

•When activating the DSP mode (except All Channel Stereo mode), you can adjust the following settings:

EFFECT (see page 29) LIVENESS (see page 29) ROOM SIZE (see page 29)

•When activating “PLIIx MUSIC” and “PLII MUSIC”, you can adjust the following settings:

CENTER WIDTH (see page 30) DIMENSION (see page 30) PANORAMA (see page 30)

On the front panel:

21,3

Before you start, remember...

There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 2 again.

1Select and play any source.

•Surround/DSP modes are not available when multi channel PCM (see page 34) signals recorded in DVD-Audio are coming. See page 11 for details.

•Make sure you have selected the audio input mode (analog or digital) correctly (see pages 16 and 17).

2Press SURROUND.

MULTI JOG now works for selecting Surround/DSP modes.

3Turn MULTI JOG to select the Surround/DSP mode you want.

Ex.: When “DOLBY DIGITAL” is selected for Dolby Digital multi-channel software:

DIGITAL AUTO

L C

R

DIGITAL

S.WFR

LFE

LS

RS

Selecting the Surround/DSP modes

From the remote control:

1 2

1Select and play any source.

•Surround/DSP modes are not available when multi channel PCM (see page 34) signals recorded in DVD-Audio are coming. See page 11 for details.

•Make sure you have selected the audio input mode (analog or digital) correctly (see pages 16 and 17).

2Press SURROUND repeatedly to select the Surround/DSP mode you want.

Ex.: When “DOLBY DIGITAL” is selected for Dolby Digital multi-channel software:

DIGITAL AUTO

L C

R

DIGITAL

S.WFR

LFE

LS

RS

AUTO SURROUND*1 Surround modes*2

HALL1 HALL2 LIVE CLUB DANCE CLUB

PAVILION THEATER1 THEATER2 MONO FILM*3 ALL CH STEREO*4 SURROUND OFF (Back to the beginning)

*1 “AUTO SURROUND” is the initial setting.

*2 Available Surround modes vary depending on the speaker settings and the incoming signals. For details, see page 36.

*3 If an incoming signal is a multi-channel (more than 2 channel) digital signal, “MONO FILM” is not available.

*4 If “SURROUND SPK” is set to “<NO>,” “ALL CH STEREO” is not available.

To cancel Surround/DSP modes

Press SURROUND repeatedly so that “SURROUND OFF” appears on the display.

AUTO SURROUND*1Surround modes*2

HALL1HALL2LIVE CLUBDANCE CLUB

PAVILIONTHEATER1THEATER2 MONO FILM*3ALL CH STEREO*4 SURROUND OFF (Back to the beginning)

*1 “AUTO SURROUND” is the initial setting.

*2 Available Surround modes vary depending on the speaker settings and the incoming signals. For details, see page 36.

*3 If an incoming signal is a multi-channel (more than 2 channel) digital signal, “MONO FILM” is not available.

*4 If “SURROUND SPK” is set to “<NO>,” “ALL CH STEREO” is not available.

To cancel Surround/DSP modes

Turn MULTI JOG so that “SURROUND OFF” appears on the display.

When you select “AUTO SURROUND”

You can enjoy the Surround mode easily.

•For details about the Surround modes, see page 36.

•When “AUTO SURROUND” is activated, the AUTO SURR indicator lights up on the display.

How does “AUTO SURROUND” work?

•If a multi-channel signal comes in, an appropriate Surround mode will be selected automatically.

•If a Dolby Digital 2-channel signal with surround signal comes in, “PLIIx MOVIE” or “PLII MOVIE” will be selected.

•If a Dolby Digital 2-channel signal without surround signal comes in, “SURROUND OFF (stereo)” will be selected.

•If a Linear PCM signal comes in, “SURROUND OFF (stereo)” will be selected.

NOTE

“AUTO SURROUND” does not take effect in the following cases:

–While playing an analog source,

–While selecting one of the fixed digital decode mode—“DOLBY DIGITAL” or “DTS” (see page 18).

37

Page 38 Page 40
Image 39
Page 38 Page 40
Contents For Customer Use RX-D401S / RX-D402BJVC For Canada/pour le CanadaFor U.S.A For U.S.AFeatures Table of Contents AUDIO, TV , DBS/CATV , VCR , DVR/DVD Remote controlWhen operating a DVD player, set the mode selector o to DVD Parts identificationFront panel Display windowSurround Back SPEAKERS, Surround Speakers Rear panelVCR DBS IN, DVR/DVD IN, Monitor OUT CENTER, SUBWOOFER, Surr L, Surr RGetting started Before InstallationPutting batteries in the remote control Checking the supplied accessoriesAntenna Connecting the FM and AM antennasFM antenna connection FM antenna suppliedConnecting the powered subwoofer Connecting the speakersSpeaker Layout Diagram Connecting the speakersTurn off all components before making connections Connecting video componentsConverting video signals into Hdmi signals Hdmi connectionOnly for DVD recorder To left/right audio channel input Audio/video connectionOnly for DVD recorder To S-video input DVD recorder orMonaural audio cable Not supplied WhiteRed Stereo audio cable Not supplied Connecting a TV Connecting a DBS tunerDigital output terminal Connecting the power cordDigital audio connection Digital input terminalsUSB connection Basic operations Turn on the powerTo turn off the power into standby Selecting the video input settingHdmi for DVR/DVD, VCR and DBS Adjust the volumeSelecting the audio input setting Listening with headphonesChanging the display brightness Selecting the digital decode modeTo restore the sound, press Muting again Turning off the sounds temporarilyFrom the remote control only Press Sleep repeatedly Turning off the power with the Sleep TimerBasic adjustment of auto memory Signal and speaker indicators on the displayPress SET Basic settingsOn the front panel From the remote control Menu operation buttonsBasic setting items Speakers channels number and the sizeRoom size and the speaker distance/output level Button Operating procedurePress Setting Ex. When setting Digital in 1 terminalOUT Setting the speaker distanceInitial setting SB OUT 2SPK Initial setting Unit meter Speaker distanceSelecting the main or sub channel Activating the EX/ES/PLIIx setting- EX/ES/PLIIxSetting bass sound Setting subwoofer output-SUBWOOFER OUTSetting the low frequency effect attenuator-LFE Using the Midnight modeSetting the Audio delay level Memorizing the volume level for each source-ONE Touch OPSelecting the output video signals ∞ button SET button 4 2 / 3 button Sound adjustmentsBasic adjustment items Press AdjustPress Test to check the speakers’ output balance SBR SBLAdjusting the liveness effect for DSP modes Adjusting the bass soundsAdjusting the virtual room size for DSP modes Attenuating the input signal-INPUT ATTAdjusting the center tone-CENTER Tone Tuner operations Tuning in to stations manuallyUsing preset tuning To store the preset stationsTo tune in a preset station Selecting the FM reception modeDolby Digital Creating realistic sound fieldsReproducing theater ambience Introducing the Surround modesDTS About other digital signalsDigital Acoustic Processor DAP modes All Channel Stereo mode ALL CH Stereo3D Headphone mode Introducing the DSP modesVirtual Surround Back Using the Surround/DSP modesDTSDolby Digital Incoming Signal Type About the DSP modesSelecting the Surround/DSP modes When you select Auto SurroundMonaural mini-plugs not supplied AV Compu Link remote control systemConnections 1 AV Compu Link connection Connections 2 Video cable connectionOne-touch DVD play Connecting procedureAutomatic selection of TV’s input mode Automatic power on/offREW Operating other JVC productsVCR Channel +DVD Menu Changing the remote control code for DVD recorderDVD recorder or DVD player Release DVR/DVDTry to operate your TV by pressing TV Changing the transmittable signals for operating a TVOperating other manufacturers’ products Release TVManufacturers’ codes for VCR Changing the transmittable signals for operating a VCRRelease VCR Try to operate your VCR by pressing VCRTry to operate your DVD player by pressing DVR/DVD Release DBS/CATVManufacturers’ codes for Catv converter Manufacturers’ codes for DBS tunerSound and picture TroubleshootingPower Problem Possible Cause SolutionRemote control Tuner AM tuner SpecificationsAmplifier FM tuner IHFPage Page 0705RYMMDWJEIN

RX-D401S, RX-D402B specifications

The JVC RX-D402B and RX-D401S are two impressive models from JVC's lineup of AV receivers, designed to elevate the audio-visual experience for home theater enthusiasts. Both units incorporate cutting-edge technologies and features aimed at delivering superior sound quality and versatility.

The RX-D402B is a robust receiver that emphasizes high-definition audio performance. It supports various audio formats, including Dolby TrueHD and DTS-HD Master Audio, ensuring an immersive surround sound experience. One of its standout features is its 4K video processing capability, allowing users to connect their latest high-resolution devices seamlessly. With multiple HDMI inputs, it can accommodate various sources, from gaming consoles to streaming devices.

Similarly, the RX-D401S provides a compelling feature set designed for audiophiles. This model supports a wide array of streaming services, making it easy to access music libraries and online content. Bluetooth connectivity is another significant advantage, allowing users to stream audio directly from smartphones and tablets without hassle. An integrated digital tuner and built-in Wi-Fi make this receiver a versatile option for entertainment.

Both models employ JVC's proprietary audio technology, designed to enhance sound clarity and fidelity. Equipped with high-quality DACs (Digital-to-Analog Converters), they ensure that audio playback remains crisp and dynamic, regardless of the source. Users can also take advantage of the advanced equalization settings, enabling them to tailor the sound profile to their liking.

Another notable aspect of these receivers is their user-friendly interface. The on-screen display simplifies navigation through various settings and options. Additionally, these models come with comprehensive remote controls that allow users to manage their entire audio-visual systems effortlessly.

In terms of build quality, both the RX-D402B and RX-D401S feature durable construction and a sleek design, making them appealing additions to any home theater setup. They are also equipped with multiple outputs, including subwoofer outputs, ensuring compatibility with a range of speaker configurations.

With support for high-definition audio formats, seamless streaming options, and robust performance features, the JVC RX-D402B and RX-D401S are excellent choices for those looking to enhance their home entertainment experience. Whether enjoying a movie night, gaming session, or listening to music, these receivers offer a high-quality audio experience that meets the demands of modern consumers.
Top Page Image Contents