JVC SP-D302 CD Direct Recording, Tape to Tape Recording Dubbing, Recording AM Station to Tape

Page 24

CONTINUE

DUBBING

Recording AM Station to Tape———————————————

When recording an AM broadcast, beats may be produced which are not heard when listening to the broadcast. In this case, press the CONTINUE button on the CD Player to eliminate the beats.

1.Set to AM station and start recording.

2.Press the CONTINUE button repeatedly until the beats are eliminated.

Each time you press the button, the display changes as follows: = CUT 2 = CUT 3 = CUT 1 = (back to the beginning)

CD Direct Recording

Everything on the CD goes onto the tape in the order it is on the CD, or according to the order you have set in a program.

1.Press the CD £/8 button, then the 7 STOP button.

2.Prepare CDs. (See page 13.)

Check that source is the CD Player and be not playing a CD.

3.Insert a cassette in Deck B to record on.

•When you want to record on both sides of a tape, press the REVERSE MODE button to turn on the auto reverse mode. Check that the recording direction for the tape and the Tape Direction indicator are correct. (See page 21 “Notes for using Reverse Mode for recording”.)

4.Press the CD REC START button.

The REC indicator lights up and the System begins recording.

If you make a recording with the auto reverse mode on, the Unit will record the last song at the end of the first side at the beginning of the next side.

To stop at any time during the recording process, press the 7 STOP button.

Note: When making Sleep Timer settings while doing CD Direct recording, set the time so that there is enough leeway to finish the recording before the power goes off. If the time is set to about the length of the CD, the power may go off before recording finishes.

For CD Direct Recording using more than one disc, use a blank tape, If you use a prerecorded tape, prerecorded material may not be erased between newly-recorded tracks.

Tape to Tape Recording (Dubbing)

Recording from one tape to another is called dubbing. You can dub tapes simply, with just a single button.

o When dubbing tapes, make sure that the playback direction of Deck A and Deck B are the same.

oWhen you record both sides of a tape, press the REVERSE MODE button to turn on the auto reverse mode.

oIt is preferable that the type of tape (Type I or Type II) you record from be the same as the type you record onto.

How to Use the DUBBING Button —————————————

1.Press the TAPE ª £ button, then the 7 STOP button.

2.Insert the source cassette you want to copy from into Deck A for playback.

Insert the cassette so that it will be played in the forward (3) direction.

3.Insert the blank or erasable cassette you want to copy onto into Deck B for recording.

Insert the cassette so that it will be recorded in the forward (3) direction.

4.Press the DUBBING button.

Deck A and Deck B will start simultaneously.

To stop dubbing, press the 7STOP button.

oWhen dubbing with the DUBBING button, you can hear Sound Mode effects through the speakers or headphones. However, the sound is dubbed without Sound Mode effects.

22

Page 23 Page 25
Image 24
Page 23 Page 25
Contents MX-D302T Important for Laser Products Features Installation of the UnitPower cord How This Manual Is OrganizedTable of Contents Accessories How to Put Batteries in the Remote ControlUsing the Remote Control Getting StartedConnecting the FM Antenna Connecting the AM AntennaUsing the Supplied Wire Antenna Using an FM 75-Ohm Antenna Cable not suppliedConnecting the Speakers Connecting Auxiliary EquipmentVCR or other equipment Right SpeakerOn the Remote Control On the UnitTurning the Power On and Off Common OperationsDisplay Turning the System OnAdjusting the Volume Reinforcing the Bass SoundSound Modes Set the Volume control to Press the AUX button Listening to Auxiliary EquipmentUsing the Tuner Tuning In a StationSwitching between Frequency Bands One Touch RadioPresetting Stations Changing the FM Reception ModeThree Ways to Select a Station Using the CD Player Disc indicatorsCD £/8 For Normal Play Play mode indicator is not lit Loading DiscsQuickest Way to Start a CD Is with the One Touch Operation Place a CD, with its label side up, onto the trayBasics of Using the CD Player Normal Play Locating a Track With the Remote Control DirectlyPlaying a Disc Selecting a Disc, Track Or Passage Within a TrackContinuous Play Programming the Playing Order of the TracksRandom Play Press the Random buttonPress the £/8 button Repeating a Selection or the Discs Tray Lock FunctionLocking the Trays Unlocking the TraysUsing the Cassette Deck Regular PlayOne Touch Play Press the 0 button for the deck you want to useReverse Mode Music ScanFast Left And Fast Right Finding the Beginning of the Current SelectionRecording Things to Know before You Start RecordingStandard Recording How to Use the Dubbing Button CD Direct RecordingTape to Tape Recording Dubbing Recording AM Station to TapeUsing the Timer Setting the ClockPress the Shift button Press the 1 Clock button Press the Select 5 + or 4 button to set the timeSetting the Timer Set the time you want the Unit to come onSet the time you want the Unit to turn off Press the Select 5 + or 4 button to select the sourceSetting the Sleep Timer To Change the Sleep Timer SettingTo Cancel the Sleep Timer Setting Before Turning the Unit OffCare And Maintenance Troubleshooting SymptomPossible Cause ActionHOW to Locate Your JVC Service Center Don’t service it yourselfLimited Warranty AUDIO-1 Specifications
Top Page Image Contents