JVC SP-D302 manual Setting the Timer, Set the time you want the Unit to come on

Page 26

SHIFT

2

TIMER

45

–SELECT +

8

SET

Setting the Timer

o You can set the Timer whether the Unit is on or off.

Procedure For Setting the Timer

1.Press the SHIFT button.

2.Press the 2 TIMER button.

The Timer indicator on the display lights up and the blinking “TIMER ON” changes to the On-Time setting display.

\

3. Set the time you want the Unit to come on.

Press the SELECT 5 + or 4 – button to set the On-Time.

4.Press the 8 SET button.

“TIMER OFF” blinks on the display, and the display changes to the Off-Time setting display.

45

–SELECT +

8

SET

45

–SELECT +

\

5. Set the time you want the Unit to turn off.

Press the SELECT 5 + or 4 – button to set the Off-Time.

6. Press the 8 SET button.

The name of the source blinks in the display.

7. Press the SELECT 5 + or 4 – button to select the source.

Each time you press the button, the source changes as follows:

ïTUNER ï TUNER REC ï CD ï TAPE ï

TUNER: Selects the last station you were listening to.

TUNER REC: Records the last station you were listening to.

CD:Plays the last CD you were listening to.

TAPE: Plays the last tape you were listening to.

•In the source “TUNER”, “CD”, or “TAPE”, the timer acts as a Daily timer. Once the Daily timer has been set, it will be activated at the same time every day until the setting is turned off.

In the source “TUNER REC”, the timer acts as a Once timer. After the Once timer has been performed, the details of the setting remain stored but the Timer status is set to off.

24

Image 26

Contents MX-D302T Important for Laser Products Power cord FeaturesInstallation of the Unit How This Manual Is OrganizedTable of Contents Using the Remote Control AccessoriesHow to Put Batteries in the Remote Control Getting StartedUsing the Supplied Wire Antenna Connecting the FM AntennaConnecting the AM Antenna Using an FM 75-Ohm Antenna Cable not suppliedVCR or other equipment Connecting the SpeakersConnecting Auxiliary Equipment Right SpeakerOn the Remote Control On the UnitDisplay Turning the Power On and OffCommon Operations Turning the System OnSound Modes Adjusting the VolumeReinforcing the Bass Sound Set the Volume control to Press the AUX button Listening to Auxiliary EquipmentSwitching between Frequency Bands Using the TunerTuning In a Station One Touch RadioThree Ways to Select a Station Presetting StationsChanging the FM Reception Mode CD £/8 Using the CD PlayerDisc indicators Quickest Way to Start a CD Is with the One Touch Operation For Normal Play Play mode indicator is not litLoading Discs Place a CD, with its label side up, onto the trayPlaying a Disc Basics of Using the CD Player Normal PlayLocating a Track With the Remote Control Directly Selecting a Disc, Track Or Passage Within a TrackContinuous Play Programming the Playing Order of the TracksPress the £/8 button Random PlayPress the Random button Locking the Trays Repeating a Selection or the DiscsTray Lock Function Unlocking the TraysOne Touch Play Using the Cassette DeckRegular Play Press the 0 button for the deck you want to useFast Left And Fast Right Reverse ModeMusic Scan Finding the Beginning of the Current SelectionRecording Things to Know before You Start RecordingStandard Recording Tape to Tape Recording Dubbing How to Use the Dubbing ButtonCD Direct Recording Recording AM Station to TapePress the Shift button Press the 1 Clock button Using the TimerSetting the Clock Press the Select 5 + or 4 button to set the timeSet the time you want the Unit to turn off Setting the TimerSet the time you want the Unit to come on Press the Select 5 + or 4 button to select the sourceTo Cancel the Sleep Timer Setting Setting the Sleep TimerTo Change the Sleep Timer Setting Before Turning the Unit OffCare And Maintenance Possible Cause TroubleshootingSymptom ActionHOW to Locate Your JVC Service Center Don’t service it yourselfLimited Warranty AUDIO-1 Specifications