JVC SP-D302 manual Connecting the Speakers, Connecting Auxiliary Equipment, VCR or other equipment

Page 7

CAUTION: Make all connections before plugging the Unit into an AC power outlet.

Connecting the Speakers

For each speaker, connect one end of the speaker wire to the speaker terminals on the back of the System.

1.Open each of the terminals and insert the speaker wires firmly, then close the terminals.

2.Connect the red (+) and black (–) terminals of the right side speaker to the red (+) and black (–) terminals marked RIGHT on the System.

Connect the red (+) and black (–) terminals of the left side speaker to the red (+) and black (–) terminals marked LEFT on the System.

Laying Out the Unit

1 cm (7/16”)

1 cm (7/16”)

Leave a space of at least 1 cm on both sides of the Unit and at least 10 cm at the back, for ventilation.

Right Speaker

Left Speaker

IMPORTANT: Use speakers with the correct impedance only. The correct impedance is indicated on the back panel.

CAUTION: If a TV is installed near speakers, the TV may display irregular colors. In this case, set the speakers away from the TV.

Connecting Auxiliary Equipment

VCR or other equipment

To listen to this source, press the AUX button.

AUX

RIGHT LEFT

Now you can plug the AC power cord into the wall outlet, and your System is

at your command!

5

Image 7

Contents MX-D302T Important for Laser Products How This Manual Is Organized FeaturesInstallation of the Unit Power cordTable of Contents Getting Started AccessoriesHow to Put Batteries in the Remote Control Using the Remote ControlUsing an FM 75-Ohm Antenna Cable not supplied Connecting the FM AntennaConnecting the AM Antenna Using the Supplied Wire AntennaRight Speaker Connecting the SpeakersConnecting Auxiliary Equipment VCR or other equipmentOn the Unit On the Remote ControlTurning the System On Turning the Power On and OffCommon Operations DisplayReinforcing the Bass Sound Adjusting the VolumeSound Modes Listening to Auxiliary Equipment Set the Volume control to Press the AUX buttonOne Touch Radio Using the TunerTuning In a Station Switching between Frequency BandsChanging the FM Reception Mode Presetting StationsThree Ways to Select a Station Disc indicators Using the CD PlayerCD £/8 Place a CD, with its label side up, onto the tray For Normal Play Play mode indicator is not litLoading Discs Quickest Way to Start a CD Is with the One Touch OperationSelecting a Disc, Track Or Passage Within a Track Basics of Using the CD Player Normal PlayLocating a Track With the Remote Control Directly Playing a DiscProgramming the Playing Order of the Tracks Continuous PlayPress the Random button Random PlayPress the £/8 button Unlocking the Trays Repeating a Selection or the DiscsTray Lock Function Locking the TraysPress the 0 button for the deck you want to use Using the Cassette DeckRegular Play One Touch PlayFinding the Beginning of the Current Selection Reverse ModeMusic Scan Fast Left And Fast RightThings to Know before You Start Recording RecordingStandard Recording Recording AM Station to Tape How to Use the Dubbing ButtonCD Direct Recording Tape to Tape Recording DubbingPress the Select 5 + or 4 button to set the time Using the TimerSetting the Clock Press the Shift button Press the 1 Clock buttonPress the Select 5 + or 4 button to select the source Setting the TimerSet the time you want the Unit to come on Set the time you want the Unit to turn offBefore Turning the Unit Off Setting the Sleep TimerTo Change the Sleep Timer Setting To Cancel the Sleep Timer SettingCare And Maintenance Action TroubleshootingSymptom Possible CauseDon’t service it yourself HOW to Locate Your JVC Service CenterLimited Warranty AUDIO-1 Specifications