JVC SP-D302 manual Specifications

Page 32

Specifications

Amplifier Section
Output Power	55 watts per channel, min. RMS at 6 ohms at 1 kHz,
	with no more than 3% total harmonic distortion.
Input Sensitivity/Impedance (1 kHz)
AUX	300 mV/50 kohms
Speaker terminals	6 - 16 ohms
Cassette Deck Section
Frequency Response
Type II (CrO2) :	50 - 14,000 Hz
Type I (NORMAL) :	50 - 14,000 Hz
Wow And Flutter	0.15% (WRMS)
CD Automatic Changer Section
CD Capacity	3 discs
Dynamic Range	85 dB
Signal-To-Noise Ratio	90 dB
Wow And Flutter	Unmeasurable
Tuner Section
FM Tuner
Tuning Range	87.5 - 108.0 MHz
AM Tuner
Tuning Range	530 - 1,710 kHz
Dimensions	265 × 315 × 340 mm (W/H/D)
	(10-7/16 × 12-7/16 × 13-7/16 inches)
Mass	7.2 kg (15.9 lbs)
Speaker Specifications
SP-D302
Type	2-way, 2-speaker bass-reflex type
Speaker	5 cm (2 inches) cone × 1
Tweeter	5 cm (2 inches) cone × 1
Woofer	12 cm (4-3/4 inches) cone × 1
Power Handling Capacity	60 W
Impedance	6 ohms
Frequency Range	50 Hz - 20,000 Hz
Sound Pressure Level	90 dB/w • m
Dimensions	215 × 315 × 230 mm (W/H/D)
	(8-1/2 × 12-7/16 × 9-1/16 inches)
Mass	3.3 kg (7.3 lbs)
Accessories
	AM Loop Antenna (1)
	Remote Control (1)
	Batteries R6P (SUM-3)/AA (15F) (2)
	FM Wire Antenna (1)
Power Specifications
Power Requirements	AC 120 V , 60 Hz
Power Consumption	95 watts
	9 watts (in standby mode)

Design and specifications are subject to change without notice.

VICTOR COMPANY OF JAPAN, LIMITED

30	V
EN	J C 0198TNMNATJEM

Image 32

Contents MX-D302T Important for Laser Products Features Installation of the UnitPower cord How This Manual Is OrganizedTable of Contents Accessories How to Put Batteries in the Remote ControlUsing the Remote Control Getting StartedConnecting the FM Antenna Connecting the AM AntennaUsing the Supplied Wire Antenna Using an FM 75-Ohm Antenna Cable not suppliedConnecting the Speakers Connecting Auxiliary EquipmentVCR or other equipment Right SpeakerOn the Remote Control On the UnitTurning the Power On and Off Common OperationsDisplay Turning the System OnSound Modes Adjusting the VolumeReinforcing the Bass Sound Set the Volume control to Press the AUX button Listening to Auxiliary EquipmentUsing the Tuner Tuning In a StationSwitching between Frequency Bands One Touch RadioThree Ways to Select a Station Presetting StationsChanging the FM Reception Mode CD £/8 Using the CD PlayerDisc indicators For Normal Play Play mode indicator is not lit Loading DiscsQuickest Way to Start a CD Is with the One Touch Operation Place a CD, with its label side up, onto the trayBasics of Using the CD Player Normal Play Locating a Track With the Remote Control DirectlyPlaying a Disc Selecting a Disc, Track Or Passage Within a TrackContinuous Play Programming the Playing Order of the TracksPress the £/8 button Random PlayPress the Random button Repeating a Selection or the Discs Tray Lock FunctionLocking the Trays Unlocking the TraysUsing the Cassette Deck Regular PlayOne Touch Play Press the 0 button for the deck you want to useReverse Mode Music ScanFast Left And Fast Right Finding the Beginning of the Current SelectionRecording Things to Know before You Start RecordingStandard Recording How to Use the Dubbing Button CD Direct RecordingTape to Tape Recording Dubbing Recording AM Station to TapeUsing the Timer Setting the ClockPress the Shift button Press the 1 Clock button Press the Select 5 + or 4 button to set the timeSetting the Timer Set the time you want the Unit to come onSet the time you want the Unit to turn off Press the Select 5 + or 4 button to select the sourceSetting the Sleep Timer To Change the Sleep Timer SettingTo Cancel the Sleep Timer Setting Before Turning the Unit OffCare And Maintenance Troubleshooting SymptomPossible Cause ActionHOW to Locate Your JVC Service Center Don’t service it yourselfLimited Warranty AUDIO-1 Specifications