JVC SP-D302 Using the Timer, Setting the Clock, Press the Shift button Press the 1 Clock button

Using the Timer

2TIMER

1 CLOCK

Display

4 – SELECT 5 +	1	2	3	POWER
	4	5	6	SLEEP
	CLOCK	TIMER
	– SELECT +			SHIFT
8 SET	7	8	9
		SET		SHIFT
	10	10	FM MODE	FM/AM
	DISC		PLAY MODE AUX
	DISC		7/CLEAR	£/8
	DISC		C D
	A	B
	REC PAUSE		DECK
			VOLUME
	SOUND	ACTIVE
	MODE	BASS EX.

RM-SE40TU

REMOTE CONTROL

Clock, timer-on time etc.

	kHz
	MHz
	A.BASS EX S.MODE
CONT. RANDOM
ALL PRGM CLOCK	REC SLEEP MONO ST

Timer indicator

When the System is being used, the display shows other items as well.

However, we have only shown the items described in this section.

The timers let you control listening and recording functions automatically.

Use the Remote Control to set the clock and timers.

Setting the Clock

The timers depend on the clock: the clock must be right for the timers to work as you expect. You can set the clock whether the Unit is on or off.

SHIFT

1

CLOCK

45

–SELECT +

8

SET

Note that the clock must be set, otherwise the timers cannot be set.

1.Press the SHIFT button.

2.Press the 1 CLOCK button.

The CLOCK indicator on the display lights up and the clock time blinks.

3.Press the SELECT 5 + or 4 – button to set the time.

Pressing the 5 + button increases the time and pressing 4 – decreases the time. Pressing the button continuously advances or decreases the time in 10 minute intervals.

4.Press the 8 SET button.

The clock stops blinking, and the clock timer starts from 0 seconds.

CAUTION: If there is a power failure, the clock loses its setting. The display shows “AM12:00”, and the clock must be reset.

23