JVC RX-E100RSL manual

Page 3

SAFETY INSTRUCTIONS

“SOME DOS AND DON’TS ON THE SAFE USE OF EQUIPMENT”

This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured.

Do read the operating instructions before you attempt to use the equipment.

Do ensure that all electrical connections (including the mains plug, extension leads and interconnections between pieces of equipment) are properly made and in accordance with the manufacturer’s instructions. Switch off and withdraw the mains plug when making or changing connections.

Do consult your dealer if you are ever in doubt about the installation, operation or safety of your equipment.

Do be careful with glass panels or doors on equipment.

DON’T continue to operate the equipment if you are in any doubt about it working normally, or if it is damaged in any way–switch off, withdraw the mains plug and consult your dealer.

DON’T remove any fixed cover as this may expose dangerous voltages.

DON’T leave equipment switched on when it is unattended unless it is specifically stated that it is designed for unattended operation or has a standby mode.

Switch off using the switch on the equipment and make sure that your family know how to do this.

Special arrangements may need to be made for infirm or handicapped people.

DON’T use equipment such as personal stereos or radios so that you are distracted from the requirements of traffic safety. It is illegal to watch television whilst driving.

DON’T listen to headphones at high volume as such use can permanently damage your hearing.

DON’T obstruct the ventilation of the equipment, for example with curtains or soft furnishings.

Overheating will cause damage and shorten the life of the equipment.

DON’T use makeshift stands and NEVER fix legs with wood screws — to ensure complete safety always fit the manufacturer’s approved stand or legs with the fixings provided according to the instructions.

DON’T allow electrical equipment to be exposed to rain or moisture.

ABOVE ALL

—NEVER let anyone, especially children, push anything into holes, slots or any other opening in the case -this could result in a fatal electrical shock.;

—NEVER guess or take chances with electrical equipment of any kind — it is better to be safe than sorry!

Caution: Proper Ventilation

To avoid risk of electric shock and fire and to protect from damage.

Locate the apparatus as follows:

Front:

No obstructions open spacing.

Sides:

No obstructions in 10 cm from the sides.

Top:

No obstructions in 10 cm from the top.

Back:

No obstructions in 15 cm from the back

Bottom:

No obstructions, place on the level surface.

In addition, maintain the best possible air circulation as illustrated.

Wall or obstructions

Spacing 15 cm or more

RX-E100RSL

Front

Stand height 15 cm or more

Floor

G-2

Page 2 Page 4
Image 3
Page 2 Page 4
Contents RX-E100RSL If in Doubt Consult a Competent Electrician RX-E100RSL Table of Contents See pages in the parentheses for details Remote ControlParts Identification Front PanelStarted Before Installation Putting Batteries in the Remote ControlChecking the Supplied Accessories Getting StartedAntenna Connecting the FM and AM MW/LW AntennasGetting Started FM Antenna suppliedGetting Started Connecting the SpeakersRX-E100R Speaker Layout DiagramConnecting Audio/Video Components Digital connectionsAnalogue connections Scart Terminal Specifications Plug the power cord into an AC outlet Connecting the Power CordTV Direct Turn On the PowerTo turn off the power into standby Basic OperationsBasic Operations Activating TV DirectPress TV Direct Turning Off the Power With the TimerBasic Operations Selecting the Analogue or Digital Input Mode Basic SettingsBasic Operations/Basic Settings Setting the Digital InputBasic Settings Press Control 3or 2 to select the appropriate speaker size Basic SettingsEx. When registering the rear speaker size Press Control 3or 2 to select YESTime Press Control 3 or 2 to select the delay timeDelay Time CTR DL, Rear DL DisplayCrossover Frequency Cross SETTINGThe Control buttons now work for basic settingsAppears on the display Press Control 3or 2 to select the crossover frequency levelPress Control 3or 2 to select the LFE attenuator level Press Control 3 or 2 to select on or OFFLow Frequency Effect Attenuator LFE Repeat steps 1 and 2, then select OFF in step Setting the TV Direct modeTo cancel Auto Surround Press Control 3or 2 to select AUTO1 or, AUTO2 or ManualAdjust Sound AdjustmentsPress Control 3 or 2to adjust the front Speaker balance Press AdjustReinforcing the Bass Adjusting the ToneAdjustments Sound AdjustmentsAdjusting the Subwoofer Output Level Press Control 3 or 2to adjust the sound Output levelPress FM/AM to select the band Sound Adjustments/Tuner OperationsTuning in Stations Manually Tuner OperationsMemory Using Preset TuningTuner Operations Press MemoryPress Control 3or 2 to select Mono To tune in a preset stationTo restore the stereo effect Preset channel number appearsWhat information can RDS signals provide? Using the RDS Radio DataPress PTY 9 or PTY until Tuner OperationsSearching for a Program By PTY CodesJazz music Description of the PTY codesYour Choice Temporarily Switching to Broadcast ProgramCreating Realistic Sound Fields Hall Creating Realistic Sound FieldsDAP Digital Acoustic Processor Modes Creating sound fieldCreating Realistic Sound Fields Surround modeDSP mode When Auto SR Auto Surround is turned onPress Test to check the speaker output balance Using Surround Modes Remote ControlWhen using the buttons on the front panel, see pages 37 to Ex. When Dolby Digital is activatedPress Sound Adjust the following speaker output levels from -10 to +10To cancel Surround Mode Press Test again to stop the test toneRealistic Sound Fields To cancel Theatre SurroundPRO Logic and DSP indicator light up on the display 10 keys now work for sound adjustmentsDSP indicator lights up on the display Adjust the rear speaker output levels from -10 to +10Using DAP Modes Remote Control To cancel DAP ModeSee Using Surround Modes Front PanelPress Surround ON/OFF to activate an Digital, or DTS Digital SurroundAdjust DSP Mode Using Theatre Surround Front PanelPress Control 3or 2 to adjust the speaker output level Repeat steps 4 and 5 to adjust the other speaker levelsEx. When adjusting the left rear speaker output level Press Control 3or 2 to make an adjustmentRepeat steps 4 and 5 to make other adjustments Using DAP Modes Front PanelMastering Remote Operations 10 0 +10 Adjusting the sound and operating tuner KeysMastering Remote Operations Selecting the channels and operating tuner KeysOperating DVD menu for JVC DVD player Mastering Remote OperationsOperating other JVC products Audio/video Operation buttonsManufacturers’ codes for STB Try to operate your DVD player by pressingManufacturers’ codes for DVD player Try to operate your STB by pressing STBManufacturers’ codes for TV If there are more than one code listed for your brand of TVManufacturers’ codes for VCR Try to operate your TV by pressing TVTroubleshooting Mastering Remote Operations/TroubleshootingProblem Possible Cause Solution Specifications Per channel, min. RMS, Both channelsTotal harmonic distortion. IEC268-3/DIN 0301NHMMDWJEIN

RX-E100RSL specifications

The JVC RX-E100RSL is a standout receiver that perfectly blends modern technology with user-friendly features, making it an excellent choice for both casual listeners and serious audiophiles. This receiver is designed to provide high-quality sound performance without sacrificing ease of use.

One of the main features of the JVC RX-E100RSL is its robust power output, delivering 100 watts per channel. This substantial wattage ensures that it can drive a variety of speakers without compromising sound quality. Users will appreciate the clean and clear audio performance across all frequency ranges, whether they are engaging in a casual listening session or hosting a party with friends.

The RX-E100RSL is equipped with advanced digital signal processing technologies, enhancing the clarity and richness of audio. It supports various sound modes, enabling users to tailor their listening experience to suit different genres or personal preferences. The inclusion of built-in equalization options further allows for precise adjustments, contributing to optimal sound customization.

Another noteworthy characteristic of the RX-E100RSL is its connectivity options. The receiver features multiple inputs, including HDMI, optical, and analog connections, making it versatile for any home entertainment setup. Bluetooth connectivity is also integrated, allowing for wireless streaming from smartphones or tablets. This feature caters to the modern listener's preference for seamless audio streaming.

For video enthusiasts, the RX-E100RSL supports high-definition video pass-through, which means it can transmit video signals directly to your television while maintaining audio quality. It is designed to accommodate a wide range of devices, making it a suitable component in any home theater system.

In terms of build quality, the JVC RX-E100RSL boasts a sleek and stylish design, making it an attractive addition to any audio setup. The user interface is intuitive, with clear controls and a responsive display, simplifying the experience for users of all levels of expertise.

Overall, the JVC RX-E100RSL is an impressive receiver that combines advanced technology with practical features. Its powerful output, connectivity options, and customizable sound settings make it an ideal choice for anyone looking to enhance their audio experience at home. Whether you are watching movies, enjoying music, or playing video games, the RX-E100RSL delivers a satisfying audio performance that enriches your entertainment.
Top Page Image Contents