JVC RX-E100RSL manual Press Control 3or 2 to make an adjustment, Using DAP Modes Front Panel

Page 42

CENTER : To adjust the center speaker output level (from –10 to +10).

REAR L : To adjust the left rear speaker output level (from –10 to +10).

REAR R : To adjust the right rear speaker output level (from –10 to +10).

EFFECT : To adjust the DSP effect level. As the number increases, the effect becomes stronger (normally set it to “EFFECT 3”).

*“0” is the initial setting for the speaker output levels, and “EFFECT 3” is for the DSP effect level.

If you have already changed the setting, another setting will be shown.

5Press CONTROL 3(or 2) to make an adjustment.

•When adjusting the speaker output levels, make adjustments so that the sound level of the selected speaker is set at the

same level as that of the front speakers.

CONTROL

ANALOG

L

C

R

PRO LOGIC

 

LPCM

SUBWFR LFE DSP

 

DOLBY D

LS

S

RS

DGTL AUTO

VOL

DTS

INPUT ATT

Ex.: When adjusting the center speaker output level

6Repeat steps 4 and 5 to make other adjustments.

To cancel Theatre Surround

Press DSP MODE repeatedly until “STEREO” appears on the display. The PRO LOGIC and DSP indicators go off.

Using DAP Modes (Front Panel)

A DAP mode cannot be used with another DSP mode. Once one of the DAP modes is activated, the other DSP mode in use will be canceled.

•You have to make this adjustment for each source.

•You cannot use the DAP modes if no rear speakers are connected.

1Select and play stereo analogue software or Linear PCM digital software.

2Press DSP MODE repeatedly until one of the

DAP modes appears on the display.

The DSP indicator lights up on the display.

DSP

MODE

ANALOG L

R

SUBWFR DSP

LS

S

RS

VOL

3Press ADJUST.

ADJUST

The CONTROL buttons now work for sound

 

adjustments.

4Press CONTROL ° (or 5) repeatedly until one of the following indications (with the current setting)* appears.

CONTROL

 

ANALOG

L

C

R

PRO LOGIC

 

 

 

 

 

 

 

LPCM

SUBWFR LFE DSP

 

 

 

 

 

 

 

DOLBY D

LS

S

RS

DGTL AUTO

 

 

 

VOL

 

 

DTS

INPUT ATT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

REAR L : To adjust the left rear speaker output level (from –10 to +10).

REAR R : To adjust the right rear speaker output level (from –10 to +10).

EFFECT : To adjust the DSP effect level. As the number increases, the effect becomes stronger (normally set it to “EFFECT 3”).

*“0” is the initial setting for the speaker output levels, and “EFFECT 3” is for the DSP effect level.

If you have already changed the setting, another setting will be shown.

5Press CONTROL 3(or 2) to make an adjustment.

•When adjusting the speaker output levels, make adjustments so that the sound level of the selected speaker is set at the

same level as that of the front speakers.

CONTROL

ANALOG

L

C

R

PRO LOGIC

 

LPCM

SUBWFR LFE DSP

 

DOLBY D

LS

S

RS

DGTL AUTO

 

DTS

INPUT ATT

VOL

Ex.: When adjusting the left rear speaker output level

6Repeat steps 4 and 5 to make other adjustments.

To cancel DAP Mode

Press DSP MODE repeatedly so that “STEREO” appears on the display. The DSP indicator goes off.

Creating Realistic Sound Fields

(back to the begining)

39

Page 41 Page 43
Image 42
Page 41 Page 43
Contents RX-E100RSL If in Doubt Consult a Competent Electrician RX-E100RSL Table of Contents Front Panel Remote ControlParts Identification See pages in the parentheses for detailsGetting Started Before Installation Putting Batteries in the Remote ControlChecking the Supplied Accessories StartedFM Antenna supplied Connecting the FM and AM MW/LW AntennasGetting Started AntennaConnecting the Speakers Getting StartedSpeaker Layout Diagram RX-E100RConnecting Audio/Video Components Digital connectionsAnalogue connections Scart Terminal Specifications Connecting the Power Cord Plug the power cord into an AC outletBasic Operations Turn On the PowerTo turn off the power into standby TV DirectBasic Operations Activating TV DirectPress TV Direct Turning Off the Power With the TimerBasic Operations Setting the Digital Input Basic SettingsBasic Operations/Basic Settings Selecting the Analogue or Digital Input ModeBasic Settings Press Control 3or 2 to select YES Basic SettingsEx. When registering the rear speaker size Press Control 3or 2 to select the appropriate speaker sizeDisplay Press Control 3 or 2 to select the delay timeDelay Time CTR DL, Rear DL TimePress Control 3or 2 to select the crossover frequency level SETTINGThe Control buttons now work for basic settingsAppears on the display Crossover Frequency CrossPress Control 3or 2 to select the LFE attenuator level Press Control 3 or 2 to select on or OFFLow Frequency Effect Attenuator LFE Press Control 3or 2 to select AUTO1 or, AUTO2 or Manual Setting the TV Direct modeTo cancel Auto Surround Repeat steps 1 and 2, then select OFF in stepPress Adjust Sound AdjustmentsPress Control 3 or 2to adjust the front Speaker balance AdjustAdjusting the Tone Reinforcing the BassPress Control 3 or 2to adjust the sound Output level Sound AdjustmentsAdjusting the Subwoofer Output Level AdjustmentsTuner Operations Sound Adjustments/Tuner OperationsTuning in Stations Manually Press FM/AM to select the bandPress Memory Using Preset TuningTuner Operations MemoryPreset channel number appears To tune in a preset stationTo restore the stereo effect Press Control 3or 2 to select MonoUsing the RDS Radio Data What information can RDS signals provide?By PTY Codes Tuner OperationsSearching for a Program Press PTY 9 or PTY untilDescription of the PTY codes Jazz musicSwitching to Broadcast Program Your Choice TemporarilyCreating Realistic Sound Fields Creating sound field Creating Realistic Sound FieldsDAP Digital Acoustic Processor Modes HallWhen Auto SR Auto Surround is turned on Surround modeDSP mode Creating Realistic Sound FieldsEx. When Dolby Digital is activated Using Surround Modes Remote ControlWhen using the buttons on the front panel, see pages 37 to Press Test to check the speaker output balancePress Test again to stop the test tone Adjust the following speaker output levels from -10 to +10To cancel Surround Mode Press Sound10 keys now work for sound adjustments To cancel Theatre SurroundPRO Logic and DSP indicator light up on the display Realistic Sound FieldsTo cancel DAP Mode Adjust the rear speaker output levels from -10 to +10Using DAP Modes Remote Control DSP indicator lights up on the displayDigital, or DTS Digital Surround Using Surround Modes Front PanelPress Surround ON/OFF to activate an SeeRepeat steps 4 and 5 to adjust the other speaker levels Using Theatre Surround Front PanelPress Control 3or 2 to adjust the speaker output level Adjust DSP ModeUsing DAP Modes Front Panel Press Control 3or 2 to make an adjustmentRepeat steps 4 and 5 to make other adjustments Ex. When adjusting the left rear speaker output levelMastering Remote Operations Selecting the channels and operating tuner Keys Adjusting the sound and operating tuner KeysMastering Remote Operations 10 0 +10Operation buttons Mastering Remote OperationsOperating other JVC products Audio/video Operating DVD menu for JVC DVD playerTry to operate your STB by pressing STB Try to operate your DVD player by pressingManufacturers’ codes for DVD player Manufacturers’ codes for STBTry to operate your TV by pressing TV If there are more than one code listed for your brand of TVManufacturers’ codes for VCR Manufacturers’ codes for TVTroubleshooting Mastering Remote Operations/TroubleshootingProblem Possible Cause Solution Specifications Per channel, min. RMS, Both channelsTotal harmonic distortion. IEC268-3/DIN 0301NHMMDWJEIN

RX-E100RSL specifications

The JVC RX-E100RSL is a standout receiver that perfectly blends modern technology with user-friendly features, making it an excellent choice for both casual listeners and serious audiophiles. This receiver is designed to provide high-quality sound performance without sacrificing ease of use.

One of the main features of the JVC RX-E100RSL is its robust power output, delivering 100 watts per channel. This substantial wattage ensures that it can drive a variety of speakers without compromising sound quality. Users will appreciate the clean and clear audio performance across all frequency ranges, whether they are engaging in a casual listening session or hosting a party with friends.

The RX-E100RSL is equipped with advanced digital signal processing technologies, enhancing the clarity and richness of audio. It supports various sound modes, enabling users to tailor their listening experience to suit different genres or personal preferences. The inclusion of built-in equalization options further allows for precise adjustments, contributing to optimal sound customization.

Another noteworthy characteristic of the RX-E100RSL is its connectivity options. The receiver features multiple inputs, including HDMI, optical, and analog connections, making it versatile for any home entertainment setup. Bluetooth connectivity is also integrated, allowing for wireless streaming from smartphones or tablets. This feature caters to the modern listener's preference for seamless audio streaming.

For video enthusiasts, the RX-E100RSL supports high-definition video pass-through, which means it can transmit video signals directly to your television while maintaining audio quality. It is designed to accommodate a wide range of devices, making it a suitable component in any home theater system.

In terms of build quality, the JVC RX-E100RSL boasts a sleek and stylish design, making it an attractive addition to any audio setup. The user interface is intuitive, with clear controls and a responsive display, simplifying the experience for users of all levels of expertise.

Overall, the JVC RX-E100RSL is an impressive receiver that combines advanced technology with practical features. Its powerful output, connectivity options, and customizable sound settings make it an ideal choice for anyone looking to enhance their audio experience at home. Whether you are watching movies, enjoying music, or playing video games, the RX-E100RSL delivers a satisfying audio performance that enriches your entertainment.
Top Page Image Contents