3.IdentifytheRightUpright(85)andtheRight
UprightSpacer(91),whicharemarkedwith
"Right"stickersAligntheovalholeintheRight. UprightSpacerwiththeovalholeintheBase (95).Iftheholesdonotlineup,turntheRight UprightSpacerandtryagain.
InserttheUprightWire(87)throughtheRight
UprightSpacer(91)asshown.SettheRight UprightSpacerontheBase(95).
HaveasecondpersonholdtheRightUpright (85)neartheBase(95).Seetheinsetdrawing. TiethewiretieintheRightUprightsecurely aroundtheendoftheUprightWire(87).Then, pulltheotherendofthewiretieuntiltheUpright WireisroutedcompletelythroughtheRight Upright.
3
85
87
Oval
Hole
Tie
, | Hold a Bolt Spacer (14) inside the lower end of | 4 |
| ||
|
| ||||
| the Right Upright | (85). Insert a 3/8" x 4 1/4" | 7 | ||
|
| ||||
| Patch Bolt (7) with a 3/8" Star Washer (11) into |
|
| ||
| the Right Upright | and the Bolt Spacer. Repeat | 85 |
| |
| this step with a second Bolt Spacer (14), 3/8" |
|
| ||
| × 4 1/4" Patch Bolt (7), and 3/8" Star Washer |
|
| ||
| (11). |
|
|
|
|
| Hold the Right Upright (85) against the Right | _ .,- | |||
|
|
| |||
| Upright Spacer (91). Be careful not to pinch |
|
| ||
| the Upright | Wire | (87). Tighten the 3/8" x 4 1/4" |
|
|
| Patch Bolts (7) until the heads of the Patch Bolts |
|
| ||
| touch the Upright; do not fully tighten the |
|
| ||
| Patch Bolts | yet. |
|
|
|