ProForm 831.24966.0 manual

Page 9

. With the help of a second person, carefully tip the treadmill onto its right side. Partially fold the Frame (55) so that the treadmill is more stable; do not fully fold the Frame yet.

Attach a Wheel (96) to the Base (95) with a 3/8" x 2" Bolt (8) and a 3/8" Nut (10). Do not over- tighten the Nut; the Wheel must turn freely.

Press a Base Cap (89) into the Base (95).

5

89

95

96

. Align the oval hole in the Left Upright Spacer

(88)with the oval hole in the Base (95) as described in step 3.

84

Hold a Bolt Spacer (14) inside the lower end of the Left Upright (84). Insert a 3/8" x 4 1/4" Patch Bolt (7) with a 3/8" Star Washer (11) into the Left Upright and the Bolt Spacer. Repeat this step with a second Bolt Spacer (14), 3/8" x

4 1/4" Patch Bolt (7), and 3/8" Star Washer4 (11).

95"

Hold the Left Upright Spacer (88) and the Left Upright (84) against the Base (95). Tighten the 3/8" x 4 1/4" Patch Bolts (7) until the heads of the Patch Bolts touch the Upright; do not fully tighten the Patch Bolts yet.

With the help of a second person, tip the tread- mill so that the Base (95) is flat on the floor.

9

Image 9
Contents TR LL C Contents IMPORTANT Precautions Page Before YOU Begin Assembly Make sure that the power cord is unplugged InserttheUprightWire87throughtheRight Page 103 Be careful not to pinch any wires Notch a Wire Tie Page Operation and Adjustment Features of the Console Console DiagramHOW to USE the Manual Mode HOW to Turn on the PowerChange the incline of the treadmill as desired HOW to USE a Preset Workout HOW to USE the Ifit Training Mode HOW to USE the Stereo Sound SystemMetric HOW to Move the Treadmill HOW to Fold the Treadmill for StorageHOW to Lower the Treadmill for USE Troubleshooting Page Page Exercise Intensity Workout GuidelinesExercise Frequency Part LISTmModel No Qty Exploded Drawing Am lVlodel No R1209A Exploded Drawing B mlVlodel No R1209A Exploded Drawing CmlVlodel No .24966.0 R1209A Exploded Drawing DmlVlodel No .24966.0 R1209A ONE Year Full Warranty