Insert the wires into the Right Handrail (64) through the indicated hole as you set the con- sole assembly on the Left and Righl Handrails
(59, 64). Make sure that no wires are pinched.
Attach the console assembly with four #8 x 3t'4" Screws (4). Start el! four Screws, and then
tighten them, Do not overtighten the Screws.
See assembly step 5. Firmly tightenthe six 3/8" x 3 114"Screws (2) on the lower ends of the Left and Right Uprights (66, 76) (only one side is shown).
ConsoleAssembly
Ground
Wires
10. Attach the two Console Clamps (83) to the con- | 10 | |
sole assembly with four #8 x !" Screws (7), | ||
Console | ||
| Assembly |
11