ProForm 831.24843.0 user manual Assembly requires two persons, To identify small paris, see

Page 7

ASSEMBLY

•Assembly requires two persons.

•Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until you finish assembly.

•The underside of the walking belt is coated with

high-pedormance lubricant. After shipping, there may be some lubricant on fop of the walking belt or on the shipping carton. This is normal. If there is lubricant on top of the walking belt, wipe it oN

with a soft cloth and a mild, non-abrasive cleaner.

•To identify small paris, see page 6.

•Assembly requires the following tools:

the included hex keys

one Phillips screwdriver

scissors8=_

• To avoid damaging parts, do net use power tools,

1.Make sure that the power cord is unplugged.

Remove and discard the two screws (A) and the shipping bracket (B) from the r_ghtside ofthe Base (74). 3"hen,remove and discard the screws and shipping bracket (not shown) from the left side of the Base.

2. With the help of a second person, tip the tread-

2

mill onto its left side. PaPally pivot the Base (74) to help stabUze the treadmill.

Pull the Upright Wire (63) and the ground wire through the indicated hole in the Base (74).

Attach the groundwire te the Base (74) with a#8 x 1/2" Ground Screw (1).

See the inset drawing, Cut the plastic tie near the Upright Wire (63). Be careful not to dam-

age the Upright Wire,

74

63

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Write 1he serial number in the space above for reterence Model NoTable of Contents Important Precautions Page 84 em Before YOU BeginScrew Part Identification ChartIng is the key number Part, tram the Part Extra Hardware may IncludedTo identify small paris, see AssemblyAssembly requires two persons To avoid damaging parts, do net use power toolsSee As described above. Note There are no wires on the left side Nectors Properly the Console MAY Start all four Screws, and then tighten them59, 64. Make sure that no wires are pinched 1/2 Screws Make Sure that Large Hole Latch Attach Latch Housing With Spacer Left Upright TwoIs on the indicated NOW to Plug in the Power Cord Operation and AdjustmentConsole Diagram Features of the Console Clip attached to the key see the drawing on HOW to Turn on the Power HOW to USE the MJ,NUAL ModeChange the incline of the treadmill as desired Can IImWilI dispay Play--TheHOW to USE a Preset Workout Counterclockwise Information Mode HOW to USE the Crosswalk ArmsHOW to Lower the Treadmill for USE HOW to Fold and Move the TreadmillHOW to Fold the Treadmill HOW to Move the TreadmillSymptom The power turns off during use TroubleshootingRemovethekeyfromtheconsolsandUNPLUG Symptom The walking belt slows when walked on Symptom The incline of the treadmill does notUse Exercise Intensity Exercise GuidelinesPart List Exploded Drawing a Exploded Drawing B Exploded Drawing C Sears, Roebuck and Co., Hoffman Estates, IL DAY Full Warranty
Top Page Image Contents