11.Identify the Le'Itand Right Upper Body Arms (84, 85).
Make sure that the Left Upper BodyArm (84) is positioned as shown, Attach the Left Upper Body Arm to the Left Upright (66) with two 1!4" x 3 1/2" Screws (58), two t/4" Star Washers (23), and two 3/8" Star Washers (3) as shown. Do not overtighten the Screws.
Attach the Right Upper BodyArm (85) asde- scribed above.
12. Attach the | Latch | Housing | (67) | with | the Latch | 12 | |||
Spacer | (82) to the | Left Upright | (66) | with | two | #10 | |||
x 1 1/2 _'Screws | (8}; make | sure that the | large | ||||||
hole in | the | Latch | Housing | is on the indicated | |||||
side. Start | both | Screws, | and | then | tighten |
| |||
them. Be careful not to overtighten the
Screws.
Locate the Latch Pin Assembly I88). Remove the knob from the pin, Make sure that the collar and the spring are on the pin. (Note: If there are two collars, place one on each side of the spring.) Insert the pin into the Latch Housing (67). Then, tighten the knob onto the pin.
Large
13.Make sure that all parts are properly tightened before you use the treadmill, If there are sheets of plas- tic on the treadmin decals, remove the plastic, To protect the floor or carpet, place a mat under the treadmill. Note: Extra hardware may be included. Keep the included hex keys in a secure place; one of the hex keys is used to adjust the walking belt (see pages 21 and 22).
12