ProForm PFTL06009.0 user manual Assembly

Page 6

ASSEMBLY

To hire an authorized service technician to assemble the treadmill, call 1-800-445-2480.

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, some lubricant may be transferred to the top of the walking belt or the shipping carton. This is normal and does not affect treadmill performance. If there is lubri- cant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

Assembly requires the included hex keys and your own Phillips screwdriver			.	,
adjustable wrench	, rubber mallet	, and scissors	.

Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number after the parentheses is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it is preattached to one of the parts to be assembled. To avoid damaging plastic parts, do not use power tools for assem- bly. Extra hardware may be included.

5/16" Star	3/8" Star	Base Foot	3/8" Nut (7)–3
Washer (9)–6	Washer (8)–4	Base Foot
		Spacer (83)–2
Bolt Spacer (82)–4		#8 x 1" Tek Screw (1)–4	1/4" x 3/4" Bolt (5)–4
5/16" x 1" Bolt (3)–6	3/8" x 1 3/4" Patch Bolt (2)–1		3/8" x 2" Bolt (6)–3
		3/8" x 4" Bolt (4)–4

6

Image 6

Contents Mon.-Fri a.m.-6 p.m. MT Sat a.m.-4 p.m. MT QUESTIONS?Model No. PFTL06009.0 Serial No On the WEBTable of Contents Important Precautions Pulse sensor is not a medical deviceVarious factors, including the users move Page Before YOU Begin Assembly Make sure that the power cord is unplugged Do not fully fold the Frame yetOvertighten the Nut the Wheel must turn Freely Right Upright do not fully tighten the Bolts Yet With a second Bolt Spacer 82, 3/8 x 4 Bolt3/8 Star Washer Not fully fold the Frame yetBolts yet See assembly steps 4 and 6. Firmly tighten the 3/8 x 4 Bolts Be careful not to pinch the wires. Reattach Raise the Frame 52 to the position shownThis step is completed Operation and Adjustment HOW to Plug in the Power CordPRE-LUBRICATED Walking Belt Console Diagram Features of the Console HOW to Turn on the Power HOW to USE the Manual ModeMonitor your progress with the displays. The matrix-When you Measure your heart rate if desiredHOW to USE a Preset Workout Start the walking beltHOW to USE the Custom Workout Center Select the Custom Workout CenterHOW to USE the Sound System HOW to USE the Weight Loss Workout CenterSelect a weight loss workout Monitor your progress with the displays. See onHOW to USE AN Ifit Card Insert an iFit card and select a workoutInformation Mode Optional Chest Pulse SensorHOW to Lower the Treadmill for USE HOW to Fold and Move the TreadmillHOW to Move the Treadmill Knob is locked in the storage positionTroubleshooting Problem The power turns off during useCompatible with GFCI-equipped outlets Problem The walking belt slows when walked on Problem Solution Workout Guidelines Exercise GuidelinesExercise Intensity Exercise FrequencyPart LIST-Model No. PFTL06009.0 Key No. Qty DescriptionQty Exploded Drawing A-Model No. PFTL06009.0 R0709A Exploded Drawing B-Model No. PFTL06009.0 R0709A Exploded Drawing C-Model No. PFTL06009.0 R0709A Exploded Drawing D-Model No. PFTL06009.0 R0709A Ordering Replacement Parts Limited WarrantyIcon Health & Fitness, Inc., 1500 S W., Logan, UT