8.Attach the handrail assembly to the Uprights (77, 78) with six 5/16" x 1" Bolts (3) and six 5/16" Star Washers (9) as shown.
See assembly steps 4 and 6. Firmly tighten the 3/8" x 4" Bolts (4).
9.Have a second person hold the console assem- bly near the handrail assembly.
Connect the two wires from the console assem- bly to the two wires from the handrail assembly.
See the inset drawing in step 7. The connec- tors should slide together easily and snap into place. If they do not, turn one connector and try again. IF THE CONNECTORS ARE
NOT CONNECTED PROPERLY, THE CON- SOLE MAY BE DAMAGED WHEN THE POWER IS TURNED ON.
8 |
|
|
|
| Handrail |
|
|
|
|
| Assembly |
3 | 9 | 9 | 3 | 3 |
|
|
| 78 |
| 9 |
|
|
|
|
| 9 | |
|
|
|
| 3 | 77 |
9 |
| Console |
|
|
|
|
| Assembly |
|
|
|
|
| Wires |
| Wires | |
|
|
|
|
| |
Handrail
Assembly
10.Insert the wires from the console assembly into the handrail assembly.
Attach the console assembly to the handrail as- sembly with four 1/4" x 3/4" Bolts (5). Be careful not to pinch the wires.
10 |
|
Console |
|
Assembly |
|
Handrail |
|
Assembly |
|
Wires | 5 |
5 |
|
10 |
|