1. Make sure that the power cord is unplugged. | 1 |
|
| B | A |
|
With the help of a second person, carefully tip |
|
|
| |||
the treadmill onto its left side. Partially fold the |
|
|
|
|
|
|
Frame (52) so that the treadmill is more stable; |
|
|
|
| Hole |
|
do not fully fold the Frame yet. |
|
|
| 87 |
| |
Remove and discard the two indicated bolts (A) |
|
|
| 86 | 1 | |
and the shipping bracket (B). |
|
|
|
|
| |
Cut the shipping tie securing the Wire Harness |
|
|
|
| 84 |
|
(87) to the Base (84). Locate a plastic tie in the |
|
|
|
|
| |
indicated hole in the Base, and use the plastic |
|
|
|
|
|
|
tie to pull the Wire Harness out of the hole. | 52 | 83 86 |
|
|
| |
Attach two Base Feet (86) to the Base (84) in the | 1 |
|
| |||
locations shown with two #8 x 1" Tek Screws (1) |
|
|
|
|
| |
and two Base Foot Spacers (83). |
|
|
|
| 86 | |
Then, attach the other two Base Feet (86) with |
|
|
|
| ||
two #8 x 1" Tek Screws (1). |
|
|
|
|
| 1 |
|
| 83 |
| 861 |
|
|
2. Attach a Wheel (85) to the Base (84) with a | 2 |
|
|
|
|
|
3/8" x 2" Bolt (6) and a 3/8" Nut (7). Do not |
| Plastic Tie |
|
| ||
overtighten the Nut; the Wheel must turn |
|
|
|
| ||
freely. |
|
|
|
|
|
|
|
| 6 |
|
|
|
|
7 | 85 | 84 |
|
|
7