HOW TO TURN ON THE POWER
IMPORTANT: If the treadmill has been exposed to cold temperatures, allow it to warm to room tem- perature before turning on the power. If you do not do this, you may damage the console displays or other electrical components.
Plug in the power cord (see page 14). Next, lo-
cate the reset/off circuit Reset breaker on the treadmill
frame near the power cord. Make sure that the circuit breaker is in the reset position.
IMPORTANT: The console features a display demo mode, designed to be used if the treadmill is dis- played in a store. If the displays light as soon as you plug in the power cord and switch the reset/off circuit breaker to the reset position, the demo mode is turned on. To turn off the demo mode, hold down the Stop button for a few seconds. If the displays remain lit, see THE INFORMATION MODE on page 22 to turn off the demo mode.
Next, stand on the foot |
|
rails of the treadmill. | Key |
Locate the clip attached to | |
the key (see the drawing |
|
at the right), and slide the |
|
clip securely onto the | Clip |
waistband of your clothes. | |
Then, insert the key into |
|
the console. After a mo- |
|
ment, the displays will light. IMPORTANT: In an emer- | |
gency situation, the key can be pulled from the | |
console, causing the walking belt to slow to a stop. | |
Test the clip by carefully taking a few steps back- | |
ward; if the key is not pulled from the console, ad- | |
just the position of the clip. |
|
HOW TO USE THE MANUAL MODE
1.Insert the key into the console.
See HOW TO TURN ON THE POWER at the left.
2.Select the main menu. Each time the key is in- serted, the main menu will appear. Note: If you have selected a workout or the iFit Live mode, press the Menu button to return to the main menu.
3.Start the walking belt and adjust the speed.
To start the walking belt, press the Start button, the Speed increase button, or one of the numbered Quick Speed buttons. You can also press the Go button on the screen.
If you press the Start button, the Speed increase button, or the Go button, the walking belt will begin to move at 1 mph. As you exercise, change the speed of the walking belt as desired by pressing the Speed increase and decrease buttons. Each time you press one of the buttons, the speed set- ting will change by 0.1 mph; if you hold down the button, the speed setting will change in increments of 0.5 mph.
If you press one of the numbered Quick Speed but- tons, the walking belt will gradually change speed until it reaches the selected speed setting. To se- lect a speed setting that includes a
To stop the walking belt, press the Stop button. To restart the walking belt, press the Start button, the Speed increase button, or one of the numbered Quick Speed buttons.
16