3. Identify the Right Upright Spacer (91), which is | 3 | Oval |
|
|
marked with a “Right” sticker. |
|
| ||
Align the oval hole in the Right Upright Spacer | 85 | Hole | 91 | 94 |
(91) with the oval hole in the Base (94). If the |
| |||
holes do not line up, turn the Right Upright |
| Oval |
|
|
Spacer and try again. |
|
|
| |
Insert the Upright Wire (85) through the Right |
| Hole |
|
|
Upright Spacer (91). Set the Right Upright |
|
|
|
|
Spacer on the Base (94). |
|
|
|
|
4. Identify the Right Upright (83), which is marked | 4 |
|
|
|
with a “Right” sticker. Orient the Right Upright |
|
|
| |
Cover (86) as shown. Slide the Right Upright |
| 83 |
|
|
Cover onto the bottom of the Right Upright. | 85 |
|
| |
Have a second person hold the Right Upright |
| 86 |
| |
(83) near the Base (94). See the inset drawing. |
|
| 94 | |
Tie the wire tie in the Right Upright securely |
|
|
| |
around the end of the Upright Wire (85). Then, |
|
|
|
|
pull the other end of the wire tie until the Upright |
| Wire Tie |
|
|
Wire is routed completely through the Right |
|
|
| |
Upright. |
|
|
|
|
| 83 |
85 | Wire |
Tie |
8