ProForm PFTL10909.0 R1009A warranty HOW to Fold and Move the Treadmill, HOW to Move the Treadmill

Page 23

HOW TO FOLD AND MOVE THE TREADMILL

HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, adjust the incline to the lowest position. If you do not do this, you may damage the treadmill when you fold it. Remove the key and unplug the power cord. CAUTION: You must be able to safely lift 45 lbs. (20 kg) to raise, lower, or move the treadmill.

1.Hold the metal frame firmly in the location shown by the arrow at the right. CAUTION: To decrease the pos- sibility of injury, do not lift the frame by the plastic foot rails. Make sure to bend your legs and keep your back straight as you raise the frame. Raise the frame about halfway to the vertical position.

2.Raise the frame until the latch knob locks into the storage position. Make sure that the latch knob is locked in the storage position.

To protect the floor or carpet from damage, place a mat under the treadmill. Keep the treadmill out of di- rect sunlight. Do not leave the treadmill in the stor- age position in temperatures above 85° F (30° C).

HOW TO MOVE THE TREADMILL

Before moving the treadmill, convert the treadmill to the stor- age position as described above. Make sure that the latch knob is locked in the storage position.

1.Hold a handrail and the frame and place one foot against one of the wheels.

2.Tip the treadmill back until it rolls freely on the wheelsNever. Carefully move the treadmill to the desired location. move the treadmill without tipping it back. To reduce the risk of injury, use extreme caution while moving the treadmill. Do not attempt to move the treadmill over an uneven surface. Do not pull back on the frame.

3.Place one foot against a wheel, and carefully lower the treadmill until it is resting in the storage position.

Frame

Frame

Latch

Knob

Frame

Handrail

Wheel

23

Image 23
Contents On the WEB QUESTIONS?Model No. PFTL10909.0 Serial No Mon.-Fri a.m.-6 p.m. MT Sat a.m.-4 p.m. MTTable of Contents Important Precautions Page Before YOU Begin Assembly Attach the other Wheel 95 in the same way Page Touch the Upright do not fully tighten Patch Bolts yet Not fully tighten the Patch Bolts yetDo not fully fold the Frame yet Patch Bolts used in this step. Slide To overtighten the Screws2 Patch Bolt 4. Do not tighten the Patch Bolts yet Again. if the Connectors are not CON Patch Bolts yet. Be careful not to pinch Upright WireStart all six Patch Bolts before tightening any of them On page 17 and lower the incline to the low PRE-LUBRICATED Walking Belt Operation and AdjustmentHOW to Plug in the Power Cord Features of the Console Console DiagramHOW to USE the Manual Mode HOW to Turn on the PowerMeasure your heart rate if desired. Before using Start the workout HOW to USE a Preset WorkoutSelect a preset workout See on Select a competition workout HOW to USE a Competition WorkoutSee on HOW to USE the Stereo Sound System HOW to USE the Ifit Live Mode Information ModeHOW to Move the Treadmill HOW to Fold and Move the TreadmillHOW to Lower the Treadmill for USE Compatible with GFCI-equipped outlets TroubleshootingProblem The power turns off during use Top Problem The walking belt slows when walked onProblem Solution Exercise Frequency Exercise GuidelinesExercise Intensity Workout GuidelinesSuggested Stretches Key No. Qty Description Part LIST-Model No. PFTL10909.0Qty Exploded Drawing A-Model No. PFTL10909.0 R1009A Exploded Drawing B-Model No. PFTL10909.0 R1009A 107 Exploded Drawing D-Model No. PFTL10909.0 R1009A Icon Health & Fitness, Inc., 1500 S W., Logan, UT Ordering Replacement PartsLimited Warranty