ProForm J81I user manual Distance/Laps, Time/Incline, Speed/Pace

Page 9

D Insert the key Into the console.

A moment after the key is inserted,the

four displays, thetg

LED track, and vadous indicators will light.

BSelect the manual mode.

When the key is

inserted, the manual

mode will be selected, _lndicator as shown by the

manual indicator, if you have selected a workout program,

press the mode button repeatedly until the manual indicator lights.

_! Press the START button and adjust the speed of the walking belt.

A moment after the START button is pressed, the walking belt will begin to move. Hold the handrails and carefully begin walking.

As you exemise, change the speed of the walking belt as desired by pressing the SPEED buttons.

Each time one of the buttons is pressed, the speed will change by 0.1 mph. The buttons can be held down to change the speed setting quickly. Note: It may take a few seconds for the walking belt to reach the selected speed setting.

To stop the walking belt, press the STOP button. The TIME/INCLINE display will begin to flash. To restart the walking belt, press the START button again. To stop the walking belt and reset the dis- plays, hold down the STOP button for two seconds.

BAdjust the incline of the treadmill as desired

To change the incline of the treadmill, press the INCLINE buttons.Each time one of the buttons is

pressed, the inclinewill change by 0.5%. The but- tons can be held down to change the inclinequickly.

Note: It may take a few seconds for the treadmillto reach the selected inclinesetting.

_'.'Follow your progress with the LED track and the four displays.

The LED Track--

In ooooo oooo nd

When the manual

HoooooooosoHff

mode is selected, the

oooooooooe

LED matrix will display

oooooooooo

a track. The track rep-

O0000000SO

u.oooO000 OO000

resents a distance of

1/4 mile. As you exer-

cise, the indicators around the track will light one at

atime until you have completed 114 mile. A new lap willthen begin.

DISTANCE/LAPS

display--This display shows the distance that

the walking belt has moved and the number of 1/4-mile laps you

have completed. The display will altemate between one number and the other every seven seconds;

the indicator will light when the number of laps is shown.

TIME/INCLINE

display--This display

shows the elapsed time and the incline level of the treadmill. The

display will alternate

between one number and the other every seven seconds; the indicator will light when the incline is shown, Note: When a workout program is se- lected, the display will show the time remaining in the program.

SPEED/PACE

display--This display shows the speed of the walking belt and your current pace (pace is

measured in minutes

per mile). Every seven seconds, the display will change from one number to the other;,the indicator will light when your pace is shown.

Note: The console can

 

display distance, speed

 

and pace in either miles

 

or kilometers. To see

 

which unitof measure-

 

ment is selected, hold

 

down the STOP button while inserting the key into

 

the console. An =E," for english miles, or an "M," for

 

metric kilometers, will appear in the CALS/FAT

 

CALS/PULSE display. If you want to change the

 

unit of measurement, press the SPEED L_ button.

 

Remove and then reinsert the key.

9

 

Image 9
Contents SEARS, Roebuck and CO., Hoffman ESTATES, IL PRO.FORMTable of Contents Important Precautions Page Before YOU Begin Left SideRight Side Assembly HOW to Plug in the Power Cord Operation and AdjustmentPerformant Lube TM Walking Belt Metal ScrewFeatures of the Console Console DiagramClip Chest pulse sensor, refer toDISTANCE/LAPS TIME/INCLINESPEED/PACE Repeatedly until One of the four Calories and fat calories you have bumed seeCurrent Period Current Period Information ModeHOW to Adjust the Firmness of the Walking Platform HOW to USE the Hand WeightsOptional Chest Pulse Sensor HOW to Fold the Treadmill for Storage HOW to Fold and Move the TreadmillHOW to Move the Treadmill KnobTtl HOW to Lower the Treadmill for USESymptom the Power does not Turn on Maintenance and TROUBLE-SHOOTINGSymptom the Power Turns OFF During USE Symptom the Pulse Sensor does not Function ProperlyRear Roller Adjustment Bolts Symptom the Displays of the Console do not FunctionSymptom The walking belt slips when walked on ProperlyExerciseintensity Conditioning GuidelinesFat Burning Workout GuidelinesSuggested Stretches Page Part LISTmModel No RllgBA Ground WireOptic Switch Washer Optic Switch NutOptic Switch Bolt Optic SwitchR1198A 105 86UIi115 117 102102 39 .J Model No Full 90 DAY WarrantySEARS, Roebuck and CO., Dept WA, Hoffman ESTATES, IL Part No H03862-CR1198A