ProForm PATL49708.0 Again. if the Connectors are not CON, Nected PROPERLY, the Console MAY

Page 10

8. Remove the plastic ties from the Right Handrail

8

 

 

 

 

(33) and the Left Handrail (not shown). If neces-

 

 

 

 

sary, press the Cage Nuts (105) back into place.

 

 

 

 

 

With the help of a second person, hold the

 

 

 

 

 

Console (91) near the Right Upright (54).

 

 

 

 

 

Connect the Wire Harness (39) to the console

 

 

 

 

 

wire. See the inset drawing. The connectors

 

 

 

 

 

should slide together easily and snap into

 

 

 

 

 

place. If they do not, turn one connector and try

 

 

 

 

 

again. IF THE CONNECTORS ARE NOT CON-

 

 

 

 

 

NECTED PROPERLY, THE CONSOLE MAY

Plastic

 

91

 

BE DAMAGED WHEN THE POWER IS

 

 

TURNED ON.

Tie

 

33

Console

 

Next, remove the wire tie from the Wire Harness

105

 

 

(39). Then, insert the connectors and the excess

39

 

Console

Wire

 

wire downward into the Right Upright (54).

 

Wire

 

 

 

54

 

Wire

39

 

 

 

Tie

 

9. Start all six M8 x 15mm Bolts (8) with six M8

9

 

 

 

 

Star Washers (5) into the Uprights (53, 54).

 

 

 

 

Then, firmly tighten all six Bolts.

 

8

 

 

 

 

5

 

 

 

 

 

 

 

 

 

 

 

5

8

5 8

 

 

53

 

5

 

 

 

 

54

 

 

10

 

 

 

 

Image 10
Contents QUESTIONS? Model No. PATL49708.0 Serial NoTable of Contents Important Precautions Tenance and adjustment procedures de Before YOU Begin Assembly Hold the Right Upright 54 so the two round Make sure that the power cord is unpluggedHoles are on top as shown. Attach the Right See the left inset drawing. Identify the two See the upper inset drawing. Locate the wireSee the lower inset drawing. Press the indi Outer side of the Frame Spacer facing Right UprightTop View Console Tie Wire Bracket Large Hole Nected PROPERLY, the Console MAY Again. if the Connectors are not CONBe Damaged When the Power is Turned on Then, firmly tighten all six BoltsPage Top View Page HOW to Plug in the Power Cord Operation and AdjustmentPRE-LUBRICATED Walking Belt Console Diagram Features of the ConsoleInsert the key into the console HOW to Turn on the PowerHOW to USE the Manual Mode Start the walking beltMeasure your heart rate if desired Turn on the fan if desiredHOW to USE a Preset Workout Information Mode HOW to USE the Crosswalk ArmsHOW to Fold and Move the Treadmill HOW to Move the TreadmillHOW to Lower the Treadmill for USE Troubleshooting Problem The power turns off during useProblem The crosswalk arms squeak during use Problem The walking belt slows when walked onProblem Solution Workout Guidelines Exercise GuidelinesExercise Intensity Exercise FrequencyPart LIST-Model No. PATL49708.0 Key No. Qty DescriptionQty Exploded Drawing A-Model No. PATL49708.0 R0809A R0809A Exploded Drawing C-Model No. PATL49708.0 Exploded Drawing D-Model No. PATL49708.0 Limited Warranty Ordering Replacement PartsIcon Authorized Dealer