HOW to USE a Preset Workout

1.Insert the key into the console.

See HOW TO TURN ON THE POWER on page 16.

2.Select one of the six preset workouts. To select a preset work-

out, press the Trainer Workouts button or the Cross Walk Workouts button repeatedly; “P 1,” “P 2,” “P 3,” “P 4,” “P 5,”

or “P 6” will appear in the upper display for a few seconds. The maximum speed setting, maximum incline setting, and duration of the selected workout will also appear in the displays for a few seconds. In addition, a profile of the speed settings of the workout will scroll across the display.

Each workout is divided into 30 one-minute seg- ments. One speed setting and one incline setting are programmed for each segment. Note: The same speed and incline settings may be pro- grammed for consecutive segments.

3.Start the walking belt.

Press the Start button or the Speed increase button to start the workout. A moment after you press the button, the treadmill will automatically adjust to the first speed and incline settings for the workout. Hold the handrails and begin walking.

During the workout, the profile will show your progress. The flashing

segment of the profile Current Segment represents the current

segment of the workout.

The height of the flashing segment indicates the speed setting for the current segment. At the end of each segment, a series of tones will sound and the next segment of the profile will begin to flash. If a different speed or incline setting is programmed for the next segment, the speed or incline setting will flash in the display to alert you and the speed or in- cline will change.

The workout will continue in this way until the last segment of the profile flashes in the display and the last segment ends. The walking belt will then slow to a stop.

If you have selected a crosswalk workout, you will be prompted to use the crosswalk arms. When the crosswalk indicator on the console lights, move the crosswalk arms forward and backward as you walk or run on the treadmill. This action exercises your arms, shoulders, and back for a total body workout. If the speed or incline setting is too high or too low at any time during the workout, you can manually override the setting by pressing the speed or in- cline buttons; however, when the next segment of the workout begins, the treadmill will auto- matically adjust to the speed and incline set- tings for the next segment.

To stop the workout at any time, press the Stop button. To restart the workout, press the Start but- ton or the Speed increase button. The walking belt will begin to move at 2 Km/H. When the next seg- ment of the workout begins, the treadmill will auto- matically adjust to the speed and incline settings for the next segment.

4. Change the incline of the treadmill as desired. See step 4 on page 16.

5. Follow your progress with the track and the displays.

See step 5 on pages 16 and 17.

6. Measure your heart rate if desired. See step 6 on page 17.

7. Turn on the fan if desired. See step 7 on page 17.

8. When you are finished exercising, remove the key from the console.

See step 8 on page 17.