THE INFORMATION MODE/DEMO MODE
The console features an information mode that keeps track of the total number of hours that the treadmill has been operated and the total number of miles that the walking belt has moved. The information mode also al- lows you to select miles or kilometers as the unit of measurement and to turn on and turn off the demo mode.
To select the information mode, hold down the Stop button while inserting the key into the console. When the information mode is selected, the following informa- tion will be shown in the display:
The left side of the display |
|
|
will show the total number of |
|
|
miles (or kilometers) that the | Miles |
|
walking belt has moved and | Hours | |
the total number of hours |
|
|
that the treadmill has been
used. An “E” for english miles or an “M” for metric kilo- meters will appear in the right side of the display. Press the Speed + button to change the unit of measurement.
IMPORTANT: If a “d” appears in the right side of the display, the console is in the “demo” mode. This mode is intended to be used only when a treadmill is dis- played in a store. When the console is in the demo mode, the power cord can be plugged in, the key can be removed from the console, and the indicators in the display will automatically appear in a preset sequence, although the buttons on the console will not operate. If a “d” appears when the information mode is selected, press the Speed – button so “d” disappears.
To exit the information mode, remove the key from the console.
THE OPTIONAL CHEST PULSE SENSOR
An optional chest pulse sensor adds even more fea- tures to the console. The chest pulse sensor offers
HOW TO LEVEL THE TREADMILL
If the treadmill wheels are touching the floor or if the treadmill rocks slightly, turn one or both of the leveling feet under the upright base until the wheels are off the floor and the rocking motion is eliminated. Note: If nec- essary, tip the treadmill and use a phillips screwdriver to turn the leveling feet.
Leveling |
Feet |
Wheels |
20