8.Raise the Frame (67) to the position shown.
Have a second person hold the Frame until this step is completed.
Orient the Storage Latch (87) so that the large barrel and the latch knob are in the positions shown.
Remove the tie from the upper end of the Storage Latch (87). Attach the upper end of the Storage Latch to the bracket on the Frame (67) with a 3/8" x 1 3/4" Bolt (3) and a 3/8" Jam Nut
Remove the tie from the lower end of the Storage Latch (87). Keep the holes in the latch cap aligned with the holes in the Storage Latch.
Make sure to keep the latch cap inside the Storage Latch. Attach the Storage Latch to the bracket on the Base (103) with a 3/8" x 2" Bolt
(4)and a 3/8" Jam Nut (7). Note: It may be nec- essary to move the Frame back and forth to align the Storage Latch with the bracket.
Lower the Frame (67) (see HOW TO LOWER THE TREADMILL FOR USE on page 20).
9.With the help of a second person, raise the front of the treadmill and insert the crossbar on the Base (103) into the cutout in the cardboard stand as shown. Have the second person hold the treadmill to prevent it from moving forward or backward.
Firmly tighten the four 3/8" x 3 3/4" Patch Bolts
(5).
With the help of the second person, lower the treadmill off the cardboard stand.
8 |
|
|
|
67 |
|
|
|
7 | 3 | 87 |
|
Latch |
| ||
| Large |
| |
Knob |
| Barrel |
|
103 |
| 7Latch | 4 |
|
| ||
|
| Cap |
|
9 |
|
|
|
|
|
| 5 |
103 |
|
| Cardboard |
5 |
|
| |
|
|
| Stand |
10.Make sure that all parts are properly tightened before you use the treadmill. Keep the included hex keys in a secure place; one of the hex keys is used to adjust the walking belt (see pages 22 and 23). To protect the floor or carpet from damage, place a mat under the treadmill. Extra hardware may be included.
10