ProForm Not AvailablePFTL13810.0 user manual Wire 114. See the inset drawing. The con

3. With the help of a second person, lower the	3
treadmill off the cardboard stand. The stand will
be used again in assembly step 9.			89
Identify the Right Upright Sleeve (90) and the	91
			“Left”
Left Upright Sleeve (89); the Upright Sleeves				“Right”
are labeled “Right” and “Left.” Slide the Right
Upright Sleeve onto the Right Upright (92), and				90
slide the Left Upright Sleeve onto the Left
Upright (91).				92
				Cardboard
				Stand
4. Have a second person hold the console assem-	4
bly near the Uprights (91, 92).		Console
Connect the Upright Wire (93) to the Console
Wire (114). See the inset drawing. The con-		Assembly
nectors should slide together easily and
snap into place. If they do not, turn one con-
nector and try again. IF YOU DO NOT CON-
NECT THE CONNECTORS PROPERLY, THE
CONSOLE MAY BECOME DAMAGED WHEN
YOU TURN ON THE POWER. Next, remove			91
the wire tie from the Upright Wire. Insert the
connectors down into the Right Upright (92).				114
			93
	93	114	Wire	92
			Tie
	8