4.Change the incline of the treadmill as desired. To change the incline of the treadmill, press the Incline increase or decrease button, or one of the Quick Incline buttons numbered 0 to 15. Each time you press one of the buttons, the incline will gradu- ally change until it reaches the selected incline set- ting.
5.Select a display mode and monitor your progress with the display.
The console offers several display modes. The dis- play mode that you select will determine which workout information is shown. To select the de- sired display mode, repeatedly press the Display button or the increase and decrease buttons next to the Enter button.
As you walk or run on the treadmill, the center dis- play can show the following workout information:
•The incline level of the treadmill.
•The speed of the walking belt.
•The distance that you have walked or run.
•The elapsed time.
•Your pace in minutes per mile or minutes per kilometer.
•The approximate number of calories you have burned.
•Your heart rate (see step 6 on this page).
Regardless of which display mode you select, the speed and incline settings will appear in the speed and incline displays.
6.Measure your heart rate if desired. Before using
the handgrip pulse sensor, remove the sheets of plas- tic from the
metal contacts.Contacts In addition,
make sure that your hands are clean.
To measure your heart rate, stand on the foot rails and hold the
7.When you are finished exercising, remove the key from the console.
Step onto the foot rails, press the Stop button, and adjust the incline of the treadmill to the lowest setting. The incline must be at the lowest set- ting when you fold the treadmill to the storage position, or you may damage the treadmill. Next, remove the key from the console and put it in a secure place.
When you are finished using the treadmill, press the power switch into the off position and unplug the power cord. IMPORTANT: If you do not do this, the treadmillʼs electrical components may wear prematurely.
14