ProForm 595 lt warranty Make sure that no wires are pinched

Page 12

12.Attach the Latch Housing (71) to the Left Upright (73) with two #10 x 1" Tek Screws (76). Make sure that the large hole in the Latch Housing is on the side shown. Do not overtighten the Latch Screws.

Locate the Latch Assembly (72). Remove the knob from the pin. Make sure that the collar and the spring are on the pin. Then, insert the pin into the Latch Housing (71), and tighten the knob back onto the pin.

12

 

 

 

 

 

71

73

Knob

 

Spring

76

 

Large

Collar

 

 

Pin

 

 

Hole

72

13.Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of clear plastic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the tread- mill. Keep the included hex keys in a secure place; one of the hex keys is used to adjust the walking belt (see pages 23 and 24).

If you purchase the optional chest pulse sensor (see page 19), follow the steps below to install the re- ceiver included with the chest pulse sensor.

1. Make sure that the power cord is unplugged.

 

 

 

Remove the indicated M4.2 x 16mm Screw (12)

 

88

 

and the Access Door (97) from the Console

 

 

Base (88).

 

 

 

2. Connect the wire on the receiver to the indi-

 

 

 

cated wire extending from the Console Base

 

 

 

(88). Hold the receiver so the antenna is ori-

 

 

 

ented as shown and is facing the Console

 

 

 

Base. Attach the receiver to the plastic posts on

Small

 

Wire

the Access Door (97) with the two included

 

small screws.

Screws

 

Receiver

3. Make sure that no wires are pinched.

Antenna

 

Wire

Reattach the Access Door (97) with the M4.2 x

 

16mm Screw (12). Discard the other wires in-

 

 

97

cluded with the receiver.

 

12

 

 

 

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents QUESTIONS? Call TOLL-FREEOn the WEB Table of Contents Important Precautions Pulse sensor is not a medical deviceCord immediately after use, before cleaning Before YOU Begin Assembly Page Upright Spacer 80. Be careful not to pinch 96mm Bolts 5 do not fully tighten Bolts yetNot fully fold the Frame yet Tighten the Nut the Wheel must turn freelyDo not fully tighten the Bolts yet Save all six Screws for stepPage Again. if the Connectors are not CON That no wires are pinchedTighten all four Bolts Make sure that no wires are pinched Operation and Adjustment HOW to Plug in the Power CordPRE-LUBRICATED Walking Belt Console Diagram Features of the ConsoleHOW to Turn on the Power HOW to USE the Manual ModeInsert the key into the console Start the walking beltMeasure your heart rate if desired HOW to USE the Weight Loss Center Select a weight loss workoutHOW to USE a Classic Workout HOW to USE the Stereo Sound System Information ModeOptional Chest Pulse Sensor HOW to Fold and Move the Treadmill HOW to Move the TreadmillHOW to Lower the Treadmill for USE Troubleshooting Problem The power turns off during useCompatible with GFCI-equipped outlets Problem The walking belt slows when walked on Problem Solution Exercise Guidelines Exercise IntensityWorkout Guidelines Exercise FrequencyPart LIST-Model No. PFTL57809.0 Key No. Qty DescriptionKey No. Qty Description Exploded Drawing A-Model No. PFTL57809.0 R1109A Exploded Drawing B-Model No. PFTL57809.0 R1109A Exploded Drawing C-Model No. PFTL57809.0 Exploded Drawing D-Model No. PFTL57809.0 R1109A Ordering Replacement Parts Limited WarrantyIcon Health & Fitness, Inc., 1500 S W., Logan, UT

595 lt specifications

The ProForm 595 LT is a versatile and innovative treadmill designed for home use, catering to both beginner and intermediate fitness enthusiasts. It blends technology and functionality to create a user-friendly exercise experience that helps users achieve their fitness goals effectively.

One of the standout features of the 595 LT is its powerful motor. Equipped with a 2.0 CHP motor, this treadmill delivers consistent performance, allowing for speeds of up to 10 mph. This flexibility accommodates various workout intensities, whether you’re walking, jogging, or running. The motor is also designed to operate quietly, providing a peaceful environment for exercise.

The 595 LT features a spacious running surface measuring 20 x 55 inches, which provides ample room for users to move comfortably. The deck is cushioned, offering a low-impact surface that reduces stress on the joints, making it ideal for long workout sessions. This is particularly beneficial for users who may be recovering from injuries or prefer a softer surface for their runs.

This treadmill includes an intuitive console that offers a variety of built-in workout programs. With 18 pre-set programs, users can choose from goals-based, performance-focused, or calorie-burning workouts tailored to different fitness levels. The console also features a clear LCD display that tracks essential workout metrics such as time, speed, distance, calories burned, and heart rate. For added motivation, the console includes integrated tablet holders, allowing users to exercise while enjoying their favorite media.

A significant technology feature of the ProForm 595 LT is its compatibility with iFit, a subscription service that provides access to live and on-demand workout classes and global routes. This innovation allows users to elevate their training experience, receiving personalized coaching from professional trainers and exploring various scenic locations virtually.

Additionally, the ProForm 595 LT is designed for easy storage. It includes a SpaceSaver design with an EasyLift assist, enabling users to fold the treadmill vertically when not in use, saving floor space in the home.

Overall, the ProForm 595 LT treadmill is an excellent choice for those looking to enhance their fitness routine at home. With its array of features, comfortable running surface, and smart technology integration, it provides a comprehensive workout solution that can adapt to the user’s fitness journey.
Top Page Image Contents