ProForm 595 lt warranty Problem The walking belt slows when walked on

Page 23
Idler Roller Bolts
b 2–3 in.

Remove the three M4.2 x 19mm Hood Screws (13) and carefully pivot the Motor Hood (53) off.

Locate the Reed Switch (54) and the Magnet (42) on the left side of the Pulley (44). Turn the Pulley until the Magnet is aligned with the Reed Switch.

Make sure that the gap between the Magnet and the Reed Switch is about 1/8 in. (3 mm). If neces- sary, loosen the M4.2 x 19mm Screw (1), move the Reed Switch slightly, and then retighten the Screw. Reattach the Motor Hood (not shown), and run the treadmill for a few minutes to check for a correct speed reading.

53

13

1/8 in.

42

54

44

Top

View

 

PROBLEM: The incline of the treadmill does not change correctly

SOLUTION: a. With the key in the console, press one of the Incline buttons. While the incline is changing, re- move the key. After a few seconds, re-insert the key. The treadmill will automatically rise to the maximum incline level and then return to the minimum level. This will recalibrate the incline system.

PROBLEM: The walking belt slows when walked on

SOLUTION: a. Use only a single-outlet surge suppressor that meets all of the specifications described on page 13. b. If the walking belt is overtightened, treadmill perfor-

mance may decrease and the walking belt may be- come damaged. Remove the key and UNPLUG THE POWER CORD. Using the hex key, turn both idler roller bolts counterclockwise, 1/4 of a turn. When the walking belt is properly tightened, you should be able to lift each edge of the walking belt 2 to 3 in. (5 to 7 cm) off the walking platform. Be careful to keep the walking belt centered. Then, plug in the power cord, insert the key, and run the treadmill for a few minutes. Repeat until the walk- ing belt is properly tightened.

c. If the walking belt still slows when walked on, see the front cover of this manual.

23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents On the WEB QUESTIONS?Call TOLL-FREE Table of Contents Pulse sensor is not a medical device Important PrecautionsCord immediately after use, before cleaning Before YOU Begin Assembly Page 96mm Bolts 5 do not fully tighten Bolts yet Upright Spacer 80. Be careful not to pinchSave all six Screws for step Not fully fold the Frame yetTighten the Nut the Wheel must turn freely Do not fully tighten the Bolts yetPage Tighten all four Bolts Again. if the Connectors are not CONThat no wires are pinched Make sure that no wires are pinched PRE-LUBRICATED Walking Belt Operation and AdjustmentHOW to Plug in the Power Cord Features of the Console Console DiagramStart the walking belt HOW to Turn on the PowerHOW to USE the Manual Mode Insert the key into the consoleMeasure your heart rate if desired Select a weight loss workout HOW to USE the Weight Loss CenterHOW to USE a Classic Workout Optional Chest Pulse Sensor HOW to USE the Stereo Sound SystemInformation Mode HOW to Move the Treadmill HOW to Fold and Move the TreadmillHOW to Lower the Treadmill for USE Compatible with GFCI-equipped outlets TroubleshootingProblem The power turns off during use Problem The walking belt slows when walked on Problem Solution Exercise Frequency Exercise GuidelinesExercise Intensity Workout GuidelinesKey No. Qty Description Part LIST-Model No. PFTL57809.0Key No. Qty Description Exploded Drawing A-Model No. PFTL57809.0 R1109A Exploded Drawing B-Model No. PFTL57809.0 R1109A Exploded Drawing C-Model No. PFTL57809.0 Exploded Drawing D-Model No. PFTL57809.0 R1109A Icon Health & Fitness, Inc., 1500 S W., Logan, UT Ordering Replacement PartsLimited Warranty

595 lt specifications

The ProForm 595 LT is a versatile and innovative treadmill designed for home use, catering to both beginner and intermediate fitness enthusiasts. It blends technology and functionality to create a user-friendly exercise experience that helps users achieve their fitness goals effectively.

One of the standout features of the 595 LT is its powerful motor. Equipped with a 2.0 CHP motor, this treadmill delivers consistent performance, allowing for speeds of up to 10 mph. This flexibility accommodates various workout intensities, whether you’re walking, jogging, or running. The motor is also designed to operate quietly, providing a peaceful environment for exercise.

The 595 LT features a spacious running surface measuring 20 x 55 inches, which provides ample room for users to move comfortably. The deck is cushioned, offering a low-impact surface that reduces stress on the joints, making it ideal for long workout sessions. This is particularly beneficial for users who may be recovering from injuries or prefer a softer surface for their runs.

This treadmill includes an intuitive console that offers a variety of built-in workout programs. With 18 pre-set programs, users can choose from goals-based, performance-focused, or calorie-burning workouts tailored to different fitness levels. The console also features a clear LCD display that tracks essential workout metrics such as time, speed, distance, calories burned, and heart rate. For added motivation, the console includes integrated tablet holders, allowing users to exercise while enjoying their favorite media.

A significant technology feature of the ProForm 595 LT is its compatibility with iFit, a subscription service that provides access to live and on-demand workout classes and global routes. This innovation allows users to elevate their training experience, receiving personalized coaching from professional trainers and exploring various scenic locations virtually.

Additionally, the ProForm 595 LT is designed for easy storage. It includes a SpaceSaver design with an EasyLift assist, enabling users to fold the treadmill vertically when not in use, saving floor space in the home.

Overall, the ProForm 595 LT treadmill is an excellent choice for those looking to enhance their fitness routine at home. With its array of features, comfortable running surface, and smart technology integration, it provides a comprehensive workout solution that can adapt to the user’s fitness journey.
Top Page Image Contents