HOWTO'FOLD AND MOVE THE TREADMILL
HOW TO FOLD THE TREADMILL FOR STORAGE
Before folding the treadmill for storage, unplug the power cord. To prevent damage to tSe pulse sensor, be sure to unplug the pulse sensor from the console. Caution: You must be able to safely lift 45 pounds (20 kg) In order to raise, lower, or move the treadmill.
1.Hold the treadmill, with your hands in the locations shown at the dght. To decrease the possibility of Injury, bend your legs and keep your back stralghL As you raise the treedmlll, make sure to lift with your legs rather than your back. Raise the treadmill about halfway to the vertical position.
. Move your right hand to the position shown at the right,
and hold the treadmill firmly. Using your left hand, lift the storage latch. Raise the treadmill until the locking pin snaps into the storage latch. Make sure that the locking pin Is Inside the storage latcli, and that the storage latch Is fully closed.
To protect the floor or carpet from damage, place a | Storage_ |
| |
met under the treadmill. Keep the treadmill out of di- | Latch |
rect sunllghL Do not leave the treadmill In the stor- |
|
age position in temperatures above 85" Fahrenheit. |
|
HOW TO MOVE THE TREADMILL
Before moving the treadmill, convert the treadmill to the stor- age position as described above.
1.Hold one console bracket with each hand. Place one foot on the base crossbar as shown.
2.Tilt the treadmill back until it rolls freely on the front wheels. Carefully move the treadmill to the desired loca- tion. To reduce the rlsk of Injury, use extreme caution while moving the treadmill. Do not attempt to move the treadmill over an uneven surface.
3.Place one foot on the base crossbar, and carefully lower the treadmill until it is resting in the storage position.
Font hee s
.................
•.,,J
Crossbar
ket
18