Sears 831.297741 user manual Symptom the Pulse Sensor does not Function Properly

Page 21

. c.-Errorcode-"E3" may appear in the SPEED display if the speed of the walking belt surges above the selected speed setting. Remove the key, wait for ten seconds, and then reinsert it. If the error code appears again, call our toll-free HELPLINE. Do not operate the treadmill untilthe problem is corrected.

d. Error code "E4" may appear in the SPEED display if the walking boll is moving at a slow speed, and there is excessive stress on the motor. Remove the key, wait for ten seconds, and then reinsert it. If you weigh over

200 pounds, it may be helpfulto increase the incline of the treadmill. If the error code appears again, call our toll*free HELPLINE. Do not operate the treadmill until the problem is corrected.

e.Error code "E5" may appear in the PULSE display if a pulse error occurs. See HOW TO USE THE PULSE

SENSOR on pages 8 and 9, and PULSE DISPLAY on page 12.

5.SYMPTOM: THE PULSE SENSOR DOES NOT FUNCTION PROPERLY

a. See HOW TO USE THE PULSE SENSOR on page 8, and PULSE DISPLAY on page 12.

_. SYMPTOM: THE WALKING BELT IS OFF-CENTER OR SLIPS WHEN WALKED:ON

a. If the walking belt has shifted to the left, first remove the key and UNPLUG THE POWER CORD. Using the 3/16" end of the allen wrench, turn the left rear roller adjustment bolt clockwise 1/4 of a turn. Plug in the power cord, insert the key and run the treadmill for a few minutes. Repeat until the walking belt is can- tered.

b. If the walking belt has shifted to the right, first remove the key and UNPLUG THE POWER CORD. Using the 3/16" end of the allen wrench, turn the left rear roller adjustment bolt counter- clockwise 1/4 of a turn. Plug in the power cord, insert the key

and run the treadmill for a few minutes. Repeat until the walking belt is centered.

a

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents SEARS, Roebuck and CO., Hoffman ESTATES, IL SearsProform Table of ContentsImportant Precautions Right Side Front BackAssembly 89 If AttachthePulsesensor105toonectthe Headbands Holytouse the Pulsesensor Operation and Adjustment HOW to Plug in the Power CordPerformant Lube TM Walking Belt 159 Features of the ConsolePage DISTANCE/IN HOW to USEPage START/PAUSE Pulse Detected USE the PulseSee Training Zone Monitor on pages 12 WhentheTIMEdisplayreaches4 m!nutes, HOW to Select the Information ModeHOW to Fold the Treadmill for Storage HOW to Move the TreadmillHowtofold and Move the Treadmill Howtolowerthetreadmillforuse Symptom the Power Turns OFF During USE Symptom the Power does not Turn onSymptom the Walking Belt Slows When Walked on Troubi EshootingSymptom the Pulse Sensor does not Function Properly Workout Guidelines Exercise IntensitySuggested Stretches SEARS, Roebuck and CO., Dept WA, Hoffman ESTATES, IL Full 90 DAY Warranty
Top Page Image Contents