ProForm PCTL12009.0 Firmly tighten the four 5/16 x 2 1/2 Patch Bolts, Ful not to pinch the wires

Page 10

9. Slide the two Handrail Caps (80) onto the lower	9
ends of the Left Handrail (77) and the Right	9
Handrail (78) as shown.	5
Attach the Handrails (77, 78) to the Uprights (81,	5
83) with two #8 x 3/4" Screws (1), four 5/16" x	11
2 1/2" Patch Bolts (5), and four 5/16" Star	77		5
Washers (11).	77		5
Orient the Handrail Caps (80) as shown. Slide			11
the Handrail Caps against the Uprights (81, 83).	80	81
Firmly tighten the four 5/16" x 2 1/2" Patch	80	81	83
Bolts (5).		78	83
		78
		1	80
			80
			1

10. Have a second person hold the console assem-	10
bly near the Right Handrail (78). Connect the	10	Console
Wire Harness (84) to the console wire. See the		Console
inset drawing. The connectors should slide		Assembly
together easily and snap into place. If they do
not, turn one connector and try again. IF THE
CONNECTORS ARE NOT CONNECTED
PROPERLY, THE CONSOLE MAY BE DAM-
AGED WHEN YOU TURN ON THE POWER.
Next, remove the wire tie from the Wire Harness.
Insert the connectors and the excess wire into				Console
the Right Handrail.		78	84	Console
Set the console assembly on the Right Handrail		78	84	Wire	Console
(78) and the Left Handrail (not shown). Be care-				Wire Tie	Console
ful not to pinch the wires.				Wire Tie	Wire
					84

10

Image 10

Contents Model No. PCTL12009.0 Serial No QUESTIONS?Contact OUR Customer SER- Vice Department Directly Table of Contents Important Precautions Various factors, including the users movePage Before YOU Begin Assembly Do not fully fold the Frame yet Make sure that the power cord is unpluggedOvertighten the Nut the Wheels must turn Freely Bolts touch the Base do not fully tighten Patch Bolts yet Pinch the Wire Harness 84. Partially tightenNot fully fold the Frame yet Touch the Base do not fully tighten the Patch Bolts yet Bolts 3 do not tighten the Bolts yetFirmly tighten the four 5/16 x 2 1/2 Patch Bolts Inset drawing. The connectors should slideFul not to pinch the wires Together easily and snap into place. If they doBe careful not to pinch the wires in the Right Handrail Be careful not to pinch the wires. Reattach HOW to Plug in the Power Cord Operation and AdjustmentPRE-LUBRICATED Walking Belt Console Diagram Features of the ConsoleSelect the manual mode HOW to Turn on the PowerHOW to USE the Manual Mode Insert the key into the consoleTurn on the fan if desired HOW to USE a Preset Workout Select one of the preset workouts. To select oneHOW to USE AN Ifit Workout Insert an iFit card and select a workoutInformation Mode Optional Chest Pulse SensorHOW to Fold and Move the Treadmill HOW to Move the TreadmillHOW to Lower the Treadmill for USE Problem The power turns off during use TroubleshootingCompatible with GFCI-equipped outlets Problem The walking belt slows when walked on Problem Solution Workout Guidelines Exercise GuidelinesExercise Intensity Exercise FrequencyPart LIST-Model No. PCTL12009.0 Key No. Qty DescriptionQty Exploded Drawing A-Model No. PCTL12009.0 R0110A Exploded Drawing B-Model No. PCTL12009.0 R0110A Exploded Drawing C-Model No. PCTL12009.0 R0110A Exploded Drawing D-Model No. PCTL12009.0 R0110A Ordering Replacement Parts Limited Warranty