THE OPTIONAL CHEST PULSE SENSOR
An optional chest pulse sensor offers
To purchase the optional chest pulse sensor, call the telephone number on the front cover of this manual.
If you purchase the optional chest pulse sensor, follow the steps below to install the receiver in- cluded with the chest pulse sensor.
1.Make sure that the power cord is unplugged. Remove the indicated #8 x 3/4" Screw (12) and the Access Door (87) from the Console Base (93).
2.Connect the wire on the receiver (A) to the indi- cated wire extending from the Console Base (93).
Hold the receiver so that the small cylinder is oriented as shown and is facing the Console Base. Attach the receiver to the plastic posts on the Access Door (87) with the two included small screws.
3.Make sure that no wires are pinched. Reattach the Access Door (87) with the #8 x 3/4" Screw (12). Discard the other wires included with the receiver.
Small |
|
|
Screws |
|
|
A | Wires | 93 |
| ||
Small |
|
|
Cylinder |
|
|
87 |
|
|
12 |
|
|
22