ProForm 760 user manual Be careful not to pinch the Upright Wire, Not fully tighten the Bolts yet

4. Set the Right Upright Spacer (79) on the Base	4
(83). Be careful not to pinch the Upright Wire
				6
(38). With the help of a second person, hold a
Bolt Spacer (80) inside the lower end of the			78
Right Upright (78). Insert a 3/8" x 4 1/2" Bolt (6)
with a 3/8" Star Washer (9) into the Right			79	9
Upright and the Bolt Spacer. Repeat this step
				38
with a second Bolt Spacer (80), 3/8" x 4 1/2"
Bolt (6), and 3/8" Star Washer (9). Set the					77
Right Upright in the Right Upright Spacer.
Partially tighten the 3/8" x 4 1/2" Bolts (6); do				83	80
not fully tighten the Bolts yet.
Press a Base Endcap (77) into the Base (83).
5. With the help of a second person, carefully tip	5
the treadmill onto its right side. Partially fold the
Frame (56) so that the treadmill is more stable;
do not fully fold the Frame yet.
Attach a Base Pad (81) to the Base (83) in the	81			56
location shown with a #8 x 1" Tek Screw (2) and
a Base Pad Spacer (13). Then, attach another	2				111
Base Pad (81) with only a #8 x 1" Tek Screw (2).
Attach a Wheel (84) with a 3/8" x 2" Shoulder		83
Bolt (111) and a 3/8" Nut (8). Do not over-				81
tighten the Nut; the Wheel must turn freely.				13	84
				2	8
6. Set the Left Upright Spacer (76) on the Base	6		6
(83). With the help of a second person, hold a
Bolt Spacer (80) inside the lower end of the Left
Upright (74). Insert a 3/8" x 4 1/2" Bolt (6) with a				74
3/8" Star Washer (9) into the Left Upright and
the Bolt Spacer. Repeat this step with a sec-
ond Bolt Spacer (80), 3/8" x 4 1/2" Bolt (6),			9
and 3/8" Star Washer (9). Set the Left Upright		77		76
in the Left Upright Spacer.
Partially tighten the 3/8" x 4 1/2" Bolts (6); do
not fully tighten the Bolts yet.		80
Press a Base Endcap (77) into the Base (83).			83
With the help of a second person, tip the tread-
mill so that the Base (83) is flat on the floor.
	8