MAINTENANCE AND TROUBLESHOOTING
Inspect and properly tighten all parts of the elliptical exerciser regularly. Replace any worn parts immedi- ately.
For smooth |
| |
operation of the |
| |
elliptical exer- | Ramp | |
ciser, inspect | ||
| ||
and clean the |
| |
ramp regularly |
| |
using a soft |
| |
cloth and mild |
| |
detergent. |
| |
Other parts of |
| |
the elliptical |
| |
exerciser can |
|
also be
cleaned in this way. Keep liquids off the console.
Never use abrasives or solvents.
PULSE SENSOR TROUBLESHOOTING
If the handgrip pulse sensor does not function proper- ly, see step 5 on page 14.
HOW TO LEVEL THE ELLIPTICAL EXERCISER
HOW TO MOVE THE ELLIPTICAL EXERCISER
Stand in front of the elliptical exerciser, hold the han- dlebars firmly, and place one foot against the ramp in the location shown below. Pull the handlebars until the elliptical exerciser can be moved on the front wheels, and carefully move the elliptical exerciser to the desired location. Then, place one foot against the ramp, and lower the elliptical exerciser. Due to the size and weight of the elliptical exerciser, use extreme caution while moving and lowering it.
Handlebars |
Place your |
foot here |
If the elliptical exerciser rocks during use, turn one or both of the leveling feet under the front stabilizer until the rocking motion is elimi- nated.
Leveling |
Foot |
Wheel |
CD PLAYER TROUBLESHOOTING
If the CD player stops working or fails to respond, unplug the power cord and then plug it back in.
22