Spirit XG400 owner manual Operation of Your Console, Power UP

OPERATION OF YOUR CONSOLE

GETTING FAMILIAR WITH THE CONTROL PANEL

XG400 CONSOLE

	MUSCLE PROFILE
	SPEAKER
	DATA DISPLAY
	(RPM, Calories, Time,
	Distance, Pulse)
				HEART RATE
				PROFILE
			DOT MATRIX
	(Level, Program Profiles,
PROGRAM BUTTONS	And Lap Track)
(Manual, Hill, Fat Burn,		MESSAGE CENTER
Cardio, Strength, Interval,
	(Program Name, Speed,
2 User, 2HR)
	Watts, Laps, and Segment
	Time)
CONTROL KEYS					COOLING FAN

POWER UP

When the A.C. power cord is connected to the Elliptical, the console will automati- cally power up. If there is no input to the console for 20 minutes the console will go to stand-by mode. In stand-by mode the console display will turn off. To turn the console on press any key.

When initially powered on the console will perform an internal self-test. During this time all the lights will turn on. When the lights go off, the Message Center will show the software version (i.e.: VER 1.0). The distance window shows the distance in miles and the time window shows the total hours of use.

The odometer will remain displayed for only a few seconds then the console will go to the start up display. The dot matrix display will be scrolling through the different profiles of the programs and the Message Center will be scrolling the start up message. You may now begin to use the console.

13 XG400 Elliptical