Programs, CD PLAYER, VCR, or Computer on

HOW TO USE IFIT.COM CD AND VIDEO

PROGRAMS

To use iFIT.com CDs or videocassettes, the elliptical crosstrainer must be connected to your portable CD player, portable stereo, home stereo, computer with CD player, or VCR. See HOW TO CONNECT YOUR

CD PLAYER, VCR, OR COMPUTER on page 15.

Note: To purchase iFIT.com CDs and videocas- settes, call toll-free 1-888-936-4266.

Follow the steps below to use an iFIT.com CD or video program.

1	Turn on the console.
	Refer to step 1 on page 12.
	Select the iFIT.com mode.
2
	Each time the

	console is
	turned on, the


	manual mode


	will be selected.
	To select the
	iFIT.com mode,
	press the
	iFIT.com button. The indicator on the button will
	light and the letters IF will appear in the upper
	right corner of the display.
	Insert the iFIT.com CD or videocassette.
3
	If you are using an iFIT.com CD, insert the CD
	into your CD player. If you are using an iFIT.com
	videocassette, insert the videocassette into your
	VCR.

4 PressVCR. the play button on your CD player or

A moment after the play button is pressed, your personal trainer will begin guiding you through your workout. Simply follow your personal trainer’s instructions.

The program will function in almost the same way as a Smart program (refer to step 3 on page 13). However, an e lectronic “chirping” sound will alert you when the resistance and/or the pace setting is about to change.

Note: If the resistance of the elliptical crosstrainer and/or the pace setting does not change when a “chirp” is heard:

•Make sure that the indicator on the iFIT.com button is lit.

•Adjust the volume of your CD player or VCR. If the volume is too high or too low, the con- sole may not detect the program signals.

•Make sure that the audio cable is properly connected and that it is fully plugged in.

5 Follow your progress with the feedback modes.

Refer to step 4 on page 12.

6 Measure your heart rate if desired.

Refer to step 5 on page 12.

When you are finished exercising, the console

7 will automatically turn off.

Refer to step 6 on page 12.