ProForm PFCCEL05900 user manual Firmly, Avoid pinching the wires

Page 6

3.Lay a cloth over the front of the Base (1) to protect it. Lay the Upright (2) in the position shown. Connect the Extension Wire (51) to the Reed Switch Wire (50).

Next, connect the Resistance Cable (57) to the

Extension Cable (84) in the following way:

•Refer to drawing A. Pull up on the metal bracket, and insert the tip of the Resistance Cable (57) into the wire clip on the Extension Cable (84) as shown.

• Refer to drawing B.

Firmly

pull the Resistance Cable

(57) and slide it into the metal bracket on the Extension Cable (84) as shown.

•Refer to drawing C. Using pliers, squeeze the prongs on the upper end of the metal bracket together.

4.Align the two holes in the front of the Upright (2) with the two welded bolts on the front of the Base (1). Carefully push the Reed Switch Wire (not shown) into the Upright until there is no slack.

Next, pivot the Upright (2) about halfway to the vertical position while guiding the metal bracket on the Extension Cable (not shown) into the Upright. Once the top edge of the metal bracket is inside the Upright, pivot the Upright to the vertical position so it rests on

the four welded bolts on the Base (1).

Be careful to

avoid pinching the wires.

Tighten a M10 Nylon

Locknut (26) onto each welded bolt.

 

Refer to assembly step 2. Insert the tab on the Resis-

tance Control (57) into the Upright (2). Next, press the bottom of the Resistance Control against the Upright. Tighten the M4 x16mm Screw (35) into the Resistance Control and the Upright.

5.Attach the Incline Bracket (24) to the lower end of the Upright (2) with the M10 x 85mm Bolt (25) and an M10 Nylon Locknut (26). Do not overtighten the Nylon

Locknut; the Incline Bracket must pivot easily.

6

3

2

57

 

 

51

 

84

 

 

1

50

 

A

B

C

Metal

 

57

Bracket

 

 

 

57

 

57

 

 

84

84

84

4

 

 

 

 

26

 

2

 

Welded

 

 

Bolts

 

 

 

1

 

5

 

 

24

2

 

 

 

 

26

 

25

 

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Complete satisfaction t QUESTIONS?Model No. PFCCEL05900 Serial No HOT LineTable of Contents Important Precautions Right Side Before YOU BeginFront BackAssembly Avoid pinching the wires FirmlyLocknut the Incline Bracket must pivot easily Frame is turned so the V-shaped grooves are on Attach a Plastic Tie 53 to the battery clip as shownBattery TubesIndicated side of the Left Pedal Arm Identify the Left Pedal Arm.Next, identify the LeftLeft Pedal is turned as shown Through the other side of the Left Pedal ArmNext, tap a 3/4 Axle Cap 61 onto the axle Under the elliptical crosstrainerHOW to Adjust the Resistance Exercising on the Elliptical CrosstrainerIncline Adjustment Using the Upper Body ArmsDescription of the Console HOW the Pacer Programs Operate STEP-BY-STEP Console OperationHOW to Select Miles or Kilometers Pulse Sensor TROUBLE-SHOOTING Lubricating the Incline BracketTrainer Conditioning Guidelines Suggested Stretches Part LIST-Model No. PFCCEL05900 Key Qty DescriptionR0601A 8436 HOW to Order Replacement Parts Limited Warranty Part No R0601A

PFCCEL05900 specifications

The ProForm PFCCEL05900, also known as the ProForm Carbon E7, is a leading elliptical trainer that boasts a rich array of features, cutting-edge technologies, and impressive characteristics perfect for home workouts. Designed for both beginners and experienced fitness enthusiasts, this machine offers the versatility and performance needed to achieve a diverse range of fitness goals.

One of the standout features of the ProForm PFCCEL05900 is its adjustable incline capability. Users can easily modify the ramp angle from 0 to 20 degrees, enabling them to work different muscle groups effectively. This incline adjustment allows for a more dynamic workout, promoting lower body strength while enhancing calorie burning potential.

The elliptical trainer is equipped with a robust drive system that provides a smooth and quiet operation, ensuring a seamless workout experience. The 20 adjustable resistance levels cater to users of varying fitness levels, enabling personalized workouts that can evolve over time. This feature allows users to push their limits gradually while ensuring safety and comfort.

The PFCCEL05900 also stands out with its integrated iFit technology, providing access to a vast library of guided workouts led by professional trainers. By connecting to iFit, users can explore global workout routes, engage in live training sessions, and track their fitness progress, making their workout journey interactively engaging and motivating.

The oversized pedals offer enhanced stability and comfort during workouts, while the built-in heart rate monitors situated on the handlebars help users stay within their desired intensity zones for effective training. This focus on user comfort extends to the adjustable stride length which ranges from 18 to 20 inches, accommodating a variety of user heights and preferences.

Moreover, the PFCCEL05900 features a high-definition touchscreen display that provides real-time workout data including time, distance, speed, calories burned, and heartbeat. The design emphasizes user engagement, ensuring individuals remain focused on their fitness journey.

In terms of build quality, the ProForm Carbon E7 is constructed to withstand rigorous use, featuring a durable frame that can support users up to 300 pounds. Its compact design makes it an excellent choice for home gyms with limited space.

Overall, the ProForm PFCCEL05900 is an excellent investment for anyone looking to enhance their cardio routine and overall fitness levels, combining modern features with user-friendly technology to create an effective and enjoyable workout experience.
Top Page Image Contents