38.Attach one Backrest (41) to the Butterfly Backrest Frame (15) with two 1/4Ó x 3/4Ó Screws (17).
Unscrew the handle on the Adjustment Knob (99) until it is loose. Pull out the handle as far as it will go and slide the Butterfly Backrest Frame (15) into the slot in the Butterfly Upright (2). Release the handle and let the Knob snap into one of the adjustment holes on the Butterfly Backrest Frame. Tighten the handle fully.
39.Attach one Seat (13) to the Press Seat Frame (36) with four 1/4Ó x 3/4Ó Screws (17).
Unscrew the handle on the Adjustment Knob (99) until it is loose. Pull out the handle as far as it will go and slide the Press Seat Frame (36) into the slot in the Press Seat Upright (37). Release the handle and let the Knob snap into one of the adjustment holes on the Press Seat Frame. Tighten the handle fully.
40.Attach one Backrest (41) to the Press Backrest Frame (38) with two 1/4Ó x 1 3/4Ó Screws (49) and two 1/4Ó Flat Washers (71).
Attach the Press Backrest Frame (38) to the indicated hole in the Press Seat Upright (37) with a 3/8Ó x
2 3/4Ó Bolt (60) and a 3/8Ó Nylon Locknut (50). Do not overtighten the Nylon Locknut; it must be easy to pivot the Backrest Frame.
Unscrew the handle on the Long Adjustment Knob
(101)until it is loose. Pull out the handle as far as it will go and slide the bracket on the Press Backrest Frame (38) into the slot in the Press Upright (3).
Release the handle and let the Knob snap into one of the adjustment holes in the bracket. Tighten the han- dle fully.
38 | 2 |
|
| 17 | 15 |
|
| |
| Slot | 41 |
|
| |
| 99 |
|
39 |
|
|
13 |
|
|
36 |
|
|
17 |
| 17 |
99 |
|
|
37 |
|
|
40 |
|
|
41 |
|
|
|
| 38 |
|
| 49 |
|
| 71 |
|
| 49 |
Bracket |
| 3 |
|
| |
|
| Slot |
|
| 101 |
37 |
| 18 |
|
| |
| 50 |
|
16