41.Press two 3/4Ó Round Inner Caps (34) into each Pad Tube (28).
Insert one Pad Tube (28) into the Butterfly Seat Frame (11). Slide a Foam Roller (30) onto each end of the Pad Tube.
Insert the other Pad Tube (28) into the Leg Lever (29). Slide a Foam Roller (30) onto each end of the Pad Tube.
Miscellaneous Assembly
42.Identify the Left Shroud (96) which is the one with a large chart showing a number of exercises.
Attach the Left Shroud (96) to the indicated brackets on the Top Frame (1) with two #10 x 3/4Ó Black Screws (91), two #10 Flat Washers (92), two #10 Lock Washers (94) and two #10 Plain Nuts (93).
Do not tighten the Plain Nuts yet.
41 | 11 |
| |
| 34 |
| 30 |
| 28 |
30 | 29 |
| |
34 |
|
42 |
|
| 1 |
| Bracket |
92 |
|
91 | 94 |
| |
94 | 93 |
| 92 |
| 91 |
96 |
|
43.Attach the Left Shroud (96) to the indicated bracket on the Stabilizer (5) with two #8 x 3/4Ó Tek Screws (95).
Go back and tighten the Plain Nuts used in the previ- ous step.
Fasten the Right Shroud (56, not shown) on the other side of the unit in the same manner.
43
96 
5 
Bracket
95
17