14.Press a 2Ó Square Inner Cap (24) into the lower end of each Press Arm (46 and 47).
Press a 1Ó Round Inner Cap (88) into the side of each Press Arm.
Identify the Right Press Arm (47). It has a Locking Pin (98) mounted on the upper end.
Attach the Right Press Arm (47) to the Press Frame
(12)with two 3/8Ó x 2 3/4Ó Bolts (18) and two 3/8Ó Nylon Locknuts (50).
Attach the Left Press Arm (46) in the same manner. Note: The terms right and left are used in reference to a person sitting on the Seat facing away from the weight stack.
Make sure both Press Arms are oriented as shown. Tighten the Nylon Locknuts fully.
15.Leg Lever Assembly
Attach the Leg Lever (29) to the Butterfly Seat Frame (11) with a 3/8Ó x 2 3/4Ó Bolt (18) and a 3/8Ó Nylon Jamnut (21).
16.Butterfly Arm Assembly
Press a 2Ó Square Inner Cap (24) into both ends of each Butterfly Arm (80 and 81).
Wet the lower end of each Arm with soapy water. Slide a Butterfly Foam Pad (82) onto the lower end of each Arm.
14 |
|
|
|
|
| 12 |
|
50 |
| 18 |
|
50 |
|
|
|
|
| 98 | 88 |
46 |
| 47 |
|
| 18 |
| |
|
|
| |
|
|
| 24 |
88 |
|
|
|
24 |
|
|
|
15 | 11 | 21 | 18 |
|
| ||
|
|
| 29 |
16 | 24 |
|
|
|
|
| 81 |
80 |
|
| 24 |
|
|
| |
|
|
| 82 |
24 |
|
|
|
82 |
|
|
|
9