ProForm PFSY92080 manual Do not tighten the Nylon Locknuts yet

Page 6

5.Slide the Press Upright (3) onto the indicated 5/16Ó x 2 1/2Ó Carriage Bolts (22) in the Press Base (4). Tighten a 5/16Ó Nylon Locknut (68) onto each Carriage Bolt.

Note: The Press Upright (3) must be leaning towards the center of the unit with the two brackets oriented as shown.

6.Slide the Butterfly Upright (2) onto the indicated 5/16Ó x 2 1/2Ó Carriage Bolts (22) in the Butterfly Base (8). Hand tighten a 5/16Ó Nylon Locknut (68) onto each Carriage Bolt.

Do not tighten the Nylon Locknuts yet.

Note: The Butterfly Upright (2) must be oriented as shown with the bracket pointed towards the center of the unit.

5
Bracket
Bracket
3
68
68
4
22
6
2
68
Bracket
68
8
22

6

Image 6

Contents QUESTIONS? Model No. PFSY92080 Serial NoTable of Contents Important PrecautionsAssembled Dimensions Before You BeginAssembly Four Stages of the Assembly ProcessFrame Assembly Do not tighten the Nylon Locknuts yet Page Arm Assembly Butterfly Arm Assembly Cable Assembly Welded Tube Bracket Page Make sure the Long Cable Trap is oriented as shown Page Seat Assembly Locate and open the parts bag labeled ÒSeat Assembly.ÓPage Miscellaneous Assembly Do not tighten the Plain Nuts yetPress Station Cable Diagram High Cable Butterfly Cable Low Cable Cable ID ChartAdjusting the Position Butterfly Backrest AdjustmentChanging the Weight Setting Attaching the Lat Bar or Row Bar to the High Pulley StationAdjusting the Height of the Press Seat Locking the Leg leverWeight Resistance Chart Adjusting the Weight System for Row ExercisesOrdering Replacement Parts Limited WarrantyIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT Trouble-shooting and Maintenance Tightening the CablesRound Inner Cap 4Ó Retaining Ring Part Identification Chart Model No. PFSY92080 Part List Model No. PFSY92080 Qty DescriptionExploded DrawingÑModel No. PFSY92080