ProForm PFEL7806.1 user manual Locknuts are inside the hexagonal holes

Page 8

6.Orient the Left Roller Leg (12), which is marked with a “Left” sticker, near the left Crank Arm (36) as shown.

Apply a small amount of the included grease to both sides of a Wave Washer (98). Slide the Wave Washer onto the end of the left Crank Arm (36). Next, slide the Left Roller Leg (12) onto the Crank Arm and set the Roller (22) on the Base (1). Attach the Left Roller Leg with an M10 x 20mm Patch Screw (91), a Crank Axle Cap (30), and an M10 x 25mm Washer (94).

Repeat this step to attach the Right Roller Leg (21) to the right Crank Arm (not shown).

7.Identify the Left Handlebar (8), which is marked with a “Left” sticker. Insert the Left Handlebar into one of the Handlebar Legs (11) as shown.

Attach the Left Handlebar (8) with two

M8 x 42mm Bolts (71) and two M8 Nylon Locknuts (96). Make sure that the Nylon

Locknuts are inside the hexagonal holes.

Assemble the Right Handlebar and the other Handlebar Leg (not shown) in the same way.

	6	36
		36
		98
		94
	30
	91	21
	91	12
		12
		1
		22
	7
		8
		96

Hexagonal

Holes

71

11

8

Image 8

Contents Call TOLL-FREE QUESTIONS?Model No. PFEL7806.1 Serial No Table of Contents Important Precautions Before YOU Begin Assembly Page This step Wires duringAvoid pinching Locknuts are inside the hexagonal holes Wires 110 Ing the Controller Wires 95, 110 during this StepWires during This step ControllerRepeat this step for the Right Pedal Leg not shown Page HOW to USE the Elliptical Exerciser HOW to Move the Elliptical ExerciserHOW to Level the Elliptical Exerciser HOW to Exercise on the Elliptical ExerciserConsole Diagram Features of the Console Change the resistance of the pedals as desired HOW to USE the Manual ModeSelect the manual mode HOW to USE a Cross Trainer Program Turn on the fan if desiredSelect a cross trainer program Begin pedaling to start the programContinue the cross trainer program HOW to USE a Smart Program Select a smart programHOW to USE a Heart Rate Program Enter a target heart rate settingBegin pedaling to turn on the console Select a heart rate programHOW to Play the FAT Blocker Game Select the Fat Blocker gamePedal to start the game Follow your progress with the displayHOW to Play the Calorie Destroyer Game Select the Calorie Destroyer gameMaintenance and Troubleshooting HOW to USE the Stereo Sound SystemConsole Troubleshooting Handgrip Pulse Sensor TroubleshootingExercise Guidelines Exercise IntensityWorkout Guidelines Exercise FrequencyStrength Training Guidelines Part LIST-Model No. PFEL7806.1 Key No. Qty DescriptionQty Description Exploded Drawing A-Model No. PFEL7806.1 Exploded Icon Health & FITNESS, INC., 1500 S W., LOGAN, UT Ordering Replacement PartsLimited Warranty