ProForm 785 S user manual Assembly

ASSEMBLY

Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed.

Assembly requires the included allen wrenches and your own phillips screwdriver and

rubber mallet .

As you assemble the elliptical exerciser, use the drawings below to identify the small parts used in assembly. The number in parentheses below each drawing is the key number of the part, from the PART LIST on page 21. The number following the parentheses is the quantity used in assembly. Note: Some small parts may have been preassembled. If a part is not in the parts bag, check to see if it is preassembled.

M4 x 16mm	M4 x 16mm	M8 Jam Nut	M10 Nylon	M10 Split	M10 Washer
	Round Head
Screw (94)–8	Screw (69)–1	(97)–6	Locknut (89)–2	Washer (73)–6	(20)–2
M8 x 44mm Button		M8 x 41mm Button		M10 x 55mm
Screw (84)–4		Bolt (98)–6		Carriage Bolt (83)–2
M10 x 20mm Button			M10 x 90mm Carriage
Screw (49)–6			Bolt (96)–2
		Bolt Set (65)–2

1.Identify the Front Stabilizer (8). While another person lifts the front of the Frame (1), attach the Front Stabilizer to the Frame with two M10 x 90mm Carriage Bolts (96) and two M10 Nylon Locknuts (89).

1

89

1

96

8

4