THE INFORMATION MODE
The console features an information mode that keeps track of the total distance that the walking belt has moved and the total number of hours that the incline trainer has been used. The information mode also al- lows you to select miles or kilometers to measure dis- tance, and to turn on and turn off the display demo mode. You can also adjust the contrast level of the dis- play.
To select the information mode, hold down the Stop button, insert the key into the console, and then re- lease the Stop button. When the information mode is selected, the following information will appear in the display:
The display will show the total number of miles that the walking belt has moved and the total number of hours the incline trainer has been used.
The display will show the selected unit of measure- ment. To change the unit of measurement, press the Speed increase button. To view distance in miles, se- lect ENGLISH. To view distance in kilometers, select
METRIC.
The console features a display demo mode, designed to be used if the incline trainer is displayed in a store. While the demo mode is turned on, the console will function normally when you plug in the power cord, switch the reset/off circuit breaker to the reset position, and insert the key into the console. However, when you remove the key, the displays will remain lit, al- though the buttons will not function. If the demo mode is turned on, the word ON will appear in display while the information mode is selected. To turn on or turn off the demo mode, press the Speed decrease button. Note: When the incline trainer is in the demo mode, the incline will automatically rise to the maximum in- cline level.
The display will also show the contrast level of the dis- play. Press the Incline increase and decrease buttons to adjust the contrast.
To exit the information mode, remove the key from the console.
HOW TO USE THE STEREO SOUND SYSTEM
To play music or audio books through the consoleʼs speakers, you must connect your MP3 player, CD player, or other personal audio player to the console. Locate the audio wire. Plug one end into the audio jack near the speakers. Then, plug the audio wire into a jack on your MP3 player, CD player, or personal audio player. Make sure that the audio wire is fully plugged in.
Next, press the Play button on your MP3 player, CD player, or other personal audio player. Then, adjust the volume on your personal audio player or press the Volume (VOL) increase and decrease buttons on the console.
If you are using a personal CD player and the CD skips, set the CD player on the floor or another flat sur- face instead of on the console.
19