Suunto X6HR manual

Page 13

1.5.Battery Replacement of the Transmitter Belt The transmitter belt operates on a 3-Volt lithium cell, type: CR 2032.

The transmitter belt’s average expected battery life is 300 hours of use in ideal operating temperatures.

When Suunto X6hr is not receiving a signal but the transmitter belt is active, a change of battery might be necessary. Refer to chapter 2.4.1. for other factors that may interfere with the correct signal.

To change the battery:

1.Insert a coin into the slot located on the battery compartment cover on the backside of the transmitter belt.

2.Turn the coin counterclockwise until it is aligned with the open position marker, or even slightly further for easy opening.

3.Remove the battery compartment cover. Ensure that the O-ring and all surfaces are clean and dry. Do not stretch the O-ring.

4.Carefully remove the old battery.

5.Place the new battery into the battery compartment with the positive side facing up.

11

Image 13

Contents Page Page USER’S Guide Table of Contents Use of the Suunto X6hr and Transmitter Belt Chrono General Information Care and Maintenance Care of Suunto X6hrWater Resistance Care of Transmitter BeltRemove both spring bars from the pin holes Adjusting the Bracelet Suunto X6hrt Battery Replacement Replacing the Battery Page Page After sales service Mode Symbols How to Use Your Suunto X6hrDisplay Function Symbols Start Button Short press Buttons Short and Long PressLong press Suunto Button Short press Stop/CL Button Short pressButton Lock Arrow Buttons Short pressActivating the button lock Deactivating the button lockNavigating in Menus Menus Basic Menu StructureElectromagnetic interference Heart Rate Monitor and Transmitter BeltUse of Suunto X6hr and Transmitter Belt in water General Information ModesAlarm Time Mode Main DisplayDate TimeActivating alarms Acknowledging alarms Deactivating alarmsSetting the time and the dual time Changing the date Setting the icons Setting the tonesGeneral Calibrating the air pressure sensor Setting the backlightUnits Setting the time formatSetting the temperature unit Setting the date formatSetting the elevation unit Setting the air pressure unitSetting the ascent/descent rate unit Bearing Compass mode Main DisplayCompass Shortcuts Use Calibrating the compass Altitude/SealevelPage Setting the compass declination Temperature Weather Mode Main DisplayAir pressure Sealevel Memory Ascent/descent rate Hiking Mode Main DisplayAltitude Starting the logbook LogbookViewing logbook files Stopping the logbookErasing logbook files Viewing logbook history Resetting the logbook historyLogbook marks Alarms Setting the ascent/descent alarm Setting the altitude alarmStopwatch Chrono Main DisplayViewing Heart Rate memory Time/Heart RatePage Viewing the altitude memory Erasing memory files Use Alti/Baro Setting the recording intervalActivating the timer TimerSetting the Heart Rate limits Stopping the timerHR Limits PC Interface Additional FeaturesTransferring data Page Logs Charts and Data Suunto Activity Manager Features UsersAnalyzing Data Changing Suunto X6hr SettingsSystem Requirements SuuntoSports.comCommunities My SuuntoGetting Started Sport ForumsAltimeter Technical DataBarometer ThermometerTransmitter Belt Copyright and Trademark NoticeLimits of Liability and ISO 9001 Compliance Disposal of the Device Customer Service Contacts Suunto Oy 10/2004, 11/2005, 3/2007