Accusplit AX602M500DEC operating instructions Press Mode to cycle through

4-5

General Features		• Three operating modes (Countdown Repeat,
• ACCUSPLIT X case with ergonomic design and			Countdown Stop, Countdown then count up)
			for countdown timer
	no-fail buttons
		• Stroke/Stride measurement basing on “3”
•	4 button operation
		• Speed measurement (AX602M500 Model only)
• Large LCD display with contrast adjustment
		• Decimal second, minute and hour chronograph
•	12/24 hour display
			(AX602M500DEC Model only)
• Time of day and chime
		•	Beep sound selectable
•	Daily alarm
		• Uses long life Lithium CR2032 battery for years
•	Full 1/100 second chronograph with working
			of use between battery changes
	range from 0 to 19 hr. 59 min. 59.99 seconds	•	Low battery check
	with 500 memory records of split and lap time.
		The operation of the stopwatch is divided into
• Recall function for recorded split and lap times
		nine modes. As you choose each “mode”, a
•	Count-Down timer with working range from 0 to
		message will be displayed for a second before
	19 hr. 59 min. 59.9 seconds	you enter the mode:
4			5

6-7

Press MODE to cycle through:

	Normal Time mode	Speed mode
		(AX602M500 only)
	TIME	SPEED
	Alarm mode	Stroke Measurement
	ALARM	STROKE
	Chronograph mode	Pacer mode
	CHRONO	PACER
SPLIT		Timer mode
or	RECALL
STOP		TIMER
	LapTime Recall mode	Data mode

Button Operation

• MODE- used to change the watch’s operating mode

• START • SPLIT - used to start the timer or stopwatch, and for taking split and lap times

•	RECALL - used to recall recorded split
	and lap times (memories)
•	STOP • RESET - used to stop and reset the

6

RECALL DATA

stopwatch or timer

7