This is only a brief description of these buttons. Detailed uses of the buttons are different in particular functions and will be described later in the instructions.
Pressing [MODE] button will toggle among the modes above. Note that there is no
8
Time of Day Mode
The starting point for operating your stopwatch is TIME OF DAY. If TIME OF DAY is not displayed, press [Mode] until it is.
Year : - 2008
Date : - January 1
Day of week : - Monday
Time : - 12:00 am
The display format is as below :
° year
° day, month - date
° hr : min second
9
10-11
ACCUSPLIT products use a common setting procedure known as
S1 (2 sec) - Enter set function OR
S1 (4 sec) - Enter set function & clear the current settings S2 – Select field to be set (selected field will flash)
S3 – Set field to desired settings
S4 – Exit setting function
S1/S4
S2S3
| Year |
| Month and date |
| Seconds |
Hour | Minutes |
| |
| MODE |
10
During clock display, press [START • SPLIT] to switch between 12 hr and 24 hr display mode. To toggle chime ON or OFF, you can press [STOP
•RESET].The bell icon will be ON or OFF corre- spondingly.
Normal Time Setting
Press and hold [RECALL] (S1) for 2 seconds to enter setting mode.The normal time setting starts with second.The second digits will be flashing. You can change the flashing digit by pressing [START • SPLIT] (S3) button.To speed up the setting you can press and hold [START • SPLIT] for longer than 2 seconds to activate fast set- ting.To select other digits, press [STOP • RESET] (S2) button.The setting order is: Second, Minute, Hour,Year, Month, Date,
11